SOYO SY-6BA+ III manual UR2 Duplex Mode

BIOS Setup Utility			SY-6BA+ III
3-8.3 FDC Controls
FDC Controls	Setting	Description		Note
Onboard FDC
	Disabled	Turn off the on-board
controller		floppy controller
	Enabled	Use the on-board		Default
		floppy controller
3-8.4 Onboard Serial Ports

Onboard Serial Ports

Onboard UART 1 Onboard UART 2

UR2 Mode

Setting	Description	Note
Disabled
3F8/IRQ4	Choose serial port 1 &	Default
	2's I/O address.	(port 1)
2F8/IRQ3	Do not set port 1 & 2 to	Default
	the same address	(port 2)
3E8/IRQ4	except for Disabled or
2E8/IRQ3	Auto.
Auto
Standard	Supports a Standard	Default
	serial infrared IrDA.
IrDA 1.0
ASKIR	Supports a Sharp
	serial interface format.
FIR	Fast Infrared Interface

If [UR2 Mode] is set to [IrDA 1.0]/[ASKIR]/[FIR]

UR2 Duplex Mode

Half	Choose [Half] or	Default
Duplex	[Duplex] to set UR2 in
	half duplex mode or

full duplex mode respectively. Refer to your IR device specifications to select the suitable mode.

59