SOYO SY-P4VM800 Installing the Hard Disk Drive/Optical Device, BeforeInstallingtheIDE Devices

Page 11

SOYO SY-P4VM800 Quick Start Guide

2.3 Installing the Hard Disk Drive/Optical Device

BeforeInstallingtheIDE Devices:

1.For the ease of installation, we strongly recommend you install the hard drives first on IDE1, followed by the installation of the optical device on IDE2.

2.Installation of a hard disk and an optical device on one IDE slot/cable is not recommended since it will reduce system performance.

3.When installing two IDE devices on one IDE slot/cable, set one of the two IDE devices (usually the booting hard drive) to MASTER and the other SLAVE(usually a second hard drive or

CD/DVD-Rom/RW). The documentations of the IDE devices usually details how to use jumpers or switches to swap the devices between MASTER and SLAVE modes.

ConnectingIDE1/ PrimaryIDE Slot

The booting hard drive must always be attached to IDE1.

ConnectingIDE2/ SecondaryIDESlot

The second drive (usually a CD/DVD-ROM/RW) on this controller must be set to slave mode. The installation process is the same as that of IDE1.

11

Image 11

Contents Soyo SY-P4VM800 Quick Start Guide PrecautionsSoyo SY-P4VM800 Motherboard Table of Contents P28 Installing the USB 2.0 Driver……………………………………….…………………....P30Introduction Contents of the MotherboardI/O Ports Layout Motherboard LayoutFeatures Key FeaturesInstalling the Motherboard CPUFAN1 Installing the CPUMemory Frequency Table Installing the Memory ModulesBeforeInstallingtheIDE Devices Installing the Hard Disk Drive/Optical DeviceFollowthe steps belowfor proper installation Installing the Sata Hard Disk DriveInstalling the Expansion Cards Connecting the Power Supply Clearing Cmos JP5 CD1 Connectors and Jumper DefinitionConnecting Multi-channel Speakers Introduction Running the Setup UtilityStandard Cmos Setup Menu Bios Navigation Keys1STFLOPPYDRIVE Advanced Setup MenuIRQ7 Features SetupUse this item to enable or disable a power management Power Management SetupAlarm PCI / Plug & Play SetupCPU PnP Setup Bios Security Features SetupRatioActualValue Hardware MonitorDiscard Changes and Exit Load Optimal DefaultsSave Changes and Exit Soyo CD Contents of Soyo CDMotherboard Selection Menu How to Use Soyo CD?Driver Installation Menu Windows XP/Windows Installing the USB2.0 DriverBoot-up Issues TroubleshootingPool data... What should I do? During boot-up, the Cmos halts on Memory Checksum ErrorHow do I know the Bios version of my motherboard? Stability IssueBios Issue My system intermittently hangs during Windows installationAfter re-flashing the BIOS, my system will not boot-up Graphic Card IssuesHow do I re-flash the BIOS? Added PCI sound Card does not work properly Audio IssuesHow can I disable the onboard Audio? Onboard audio doesn’t work at all on my systemSometimes the system finds my CD-ROM, and sometimes not Hard Disk Drive/Floppy Drive/CD-ROM IssuesHow to Contact Us?