SOYO SY-P4VM800 quick start PCI / Plug & Play Setup, Alarm

	SOYO SY-P4VM800 Quick Start Guide
Suspendmode	This item selects the status S1(Stop Clock) when the
	system enters the power-saving Suspend mode.
SuspendTimeOut	This item sets up the timeout for Suspend mode in minutes.
	If the time selected passes without any system activity, the
	computer will enter power-saving Suspend mode.
ResumeOnRTC	The system can be turned off with a software command. If
Alarm	you enable this item, the system can automatically resume
	at a fixed time based on the system’s RTC (realtime clock).
	Use the items below this one to set the date and time of the
	wake-up alarm. You must use an ATX power supply in order
	to use this feature.
LAN/RingPowerOn	The system can be turned off with a software command. If
	you enable this item, the system can automatically resume if
	there is an incoming call on the Modem/Ring, or traffic on
	the network adapter. You must use an ATX power supply in
	order to use this feature.
KeyboardPowerOn	If you enable this item, system can automatically resume
Wake-UpKey	by pressing any keys, hot or power key on the keyboard or
	typing in the password. You must enable the Keyboard
	Power On jumper and use an ATX power supply in order to
	use this feature.

3.8 PCI / Plug & Play Setup Page

This page sets up some parameters for devices installed on the PCI bus and devices that use the system plug and play capability.

CMOSSETUPUTILITY–Copyright(C)1985-2003,AmericanMegatrends,Inc.

	PCI/PlugandPlaySetup
					HelpItem
PrimaryGraphicsAdapter		PCI
ShareMemorySize		32MB
					Options
AllocateIRQtoPCIVGA	Yes
PCIIDEBusMaster	Disabled				PCI
					AGP
↑↓←→ :Move	Enter:Select +/-/:Value			F10:Save Esc:Exit
F1:GeneralHelp			F9:OptimizedDefaults
PrimaryGraphics			This item indicates if the primary graphics adapter uses the
Adapter			PCI or the AGP bus. The default PCI setting still lets the
			onboard display work and allows the use of a second display
			card installed in an AGP slot.
ShareMemorySize			This item lets you allocate a portion of the main memory for
			the onboard VGA display application with three options of
			32/16/8MB.
AllocateIRQtoPCI			If this item is enabled, an IRQ will be assigned to the PCI VGA
VGA			graphics system. You set this value to No to free up an IRQ.
PCIIDEBusMaster			This item enables or disables the DMA under DOS mode. We
			recommend you to leave this item at the default value.
				23

The SOYO CD