SOYO SY-P4VM800 quick start Clearing Cmos JP5

SOYO SY-P4VM800 Quick Start Guide

2.6 Clearing CMOS (JP5)

In the case of CMOS being wrongly configured that results in boot-up errors or hardware/software malfunction, follow the procedures below to clear the CMOS to restore default settings.

1.Short Pin 2-3 of JP5 jumper as indicated below.

2.Place the jumper cap back on pin 1-2 to return to default settings.

3 2 1

JP5

Clear CMOS	Short Circuit			Open
JP5	Short Pin 2-3 for 5 seconds			Short Pin 1-2 to
	to clear the CMOS			retain new settings
	1	2	3	1	2	3

Note: The power cord must be detached from the ATX power supply or electric socket before performing the Clearing CMOS operation.

15