SOYO SY-K7VTA PRO Universal Serial Bus USB1/USB2/USB3, USB4, Onboard Joystick port/audio

BIOS Setup Utility SY-K7VTA PRO

5.Universal Serial Bus USB1/USB2/(USB3, USB4)

This Motherboard provides four USB ports for your additional devices. Plug the USB device jack into the available USB connector USB1 or USB2.

-Standard device drivers come with the Win98 for commonly used USB devices.

-With Win95, use the flow UHCI specifications. To use USB devices under Win95, usually you have to install the device that driver comes with the USB device you have purchased.

USB3		USB4
+5V	1	2	+5V
(-)Data	3	4	(-)Data
(+)Data	5	6	(+)Data
GND	7	8	GND
NC	9	10	GND

USB3 and 4 are available. To make use of these USB ports, purchase a USB cable from your dealer. The lay-out of USB3 and 4 is as follows:

6.Onboard Joystick port/audio

This Motherboard provides Joystick port and audio.

-Attach the joystick cable to the 15-pin JOYSTICK port at the rear panel of you motherboard.

-This Motherboard features three built-in audio-stereo ports (labeled line-in, line-out, and mic jack) convenient to directly plug-in all your external audio devices.

35