SOYO SY-K7VTA PRO user manual PCI Master, Wake up On, LAN/Ring, RTC Alarm, Resume, Primary Intr

BIOS Setup Utility		SY-K7VTA PRO
Wake Up	Setting	Description	Note
Events
HDD & FDD	OFF
	ON	When On of HDD & FDD, any	Default
		activity from one of the listed
		system peripheral devices wakes up
		the system.

PCI Master

OFF		Default
ON	When On of PCI Master, any
	activity from one of the listed
	system peripheral devices wakes up
	the system

Wake up On
	Disabled	An input signal on the serial Ring	Default
LAN/Ring	Enabled	Indicator (RI) line (in other words,
		an incoming call on the
		modem/LAN) awakens the system
		from a soft off state.
RTC Alarm	Disabled	The system ignores the alarm.	Default
Resume	Enabled	Set alarm to power on the system by
		the date (1-31) or time (hh:mm:ss).
		If the date is set to [0], the system
		will self-power on by alarm
		everyday at the set time.
Primary INTR	ON	When set to On, any event occurring	Default
		at will awaken a system which has
		been powered down.
	OFF

IRQs Activity

Monitoring

(Press Enter)

Disabled IRQ8 (RTC Alarm), IRQ9(IRQ2 Redir), IRQ10( Reserved), IRQ11(Reserved), IRQ15 (Reserved)

Secondary IRQ3(COM2), IRQ4(COM1), IRQ5(LPT2),

IRQ6(Floppy Disk), IRQ7(LPT1),

IRQ12(PS/2 Mouse), IRQ13(Coprocessor),

IRQ14(HardDsik)

77