SOYO SY-K7VTA PRO user manual Voice Doctor, Cmos Clearing JP5, JP5 Setting

BIOS Setup Utility SY-K7VTA PRO

2-3.5 Voice Doctor

If the system does not boot-up properly, the Voice Doctor will inform the user by voice through internal/external speaker at what point in boot-up sequence the problem arises.

Below are the possible errors the user may encounter:

7.The Processor might be damage or not installed properly

8.The memory module might be damage or not installed properly

9.VGA card might be damage or not inserted properly

10.No Keyboard connected

11.Defective HD-Driver (IDE)

12.Floppy might error

Voice Doctor supports two language, refer the table below on the language you prefer.

Voice Doctor’s English Language Chinese Language Language

JP7 Setting Short pin 1-2 Short pin 2-3

1 2 3

1 2 3

2-3.6 CMOS Clearing (JP5)

After you have turned off your computer, clear the CMOS memory by momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then restore JP5 to the initial 1-2 jumper setting in order to recover and retain the default settings.

Jumper JP5 can be easily identified by its white colored cap.

CMOS	Clear CMOS Data	Retain CMOS Data
Clearing

JP5 Setting

Short pin 2-3 for

at least 5 seconds to

clear the CMOS

1 2 3

Short pin 1-2 to retain new settings

1 2 3

Note: You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation.

44