Silicon Image SSDS00-3650H-R manual True IDE Multiword DMA Read/Write Access Timing

Page 25

ELECTRICAL SPECIFICATION

SSD-HXXX(I)-3650 DATA SHEET

True IDE Multiword DMA Read/Write Access Timing

This function does not apply to SiliconDrives that have DMA disabled.

Figure 7: True IDE Multiword DMA Read/Write Access Timing

Table 15: True IDE Multiword DMA Read/Write Access Timing

Symbol

Parameter

Minimum

Maximum

Units

tRWC

Cycle Time (mode 2)

100

-

ns

tRWPW

DIOR/DIOW Pulse Width

65

-

ns

tRDA

DIOR Data Access

-

50

ns

tRWSU

DIOR/DIOW Data Setup Time

15

-

ns

tWH

DIOW Data Hold Time

5

-

ns

tRH

DIOR Data Hold Time

5

-

ns

tDMRW

DMACK to DIOR/DIOW Setup Time

0

-

ns

tRWDH

DIOR/DIOW to DMACK Hold Time

5

-

ns

tRWN

DIOR/DIOW negated Pulse Width

25

-

ns

tRWD

DIOR/DIOW to DMARQ Delay

-

35

ns

tCSRW

CS(1:0) valid to DIOR/DIOW

10

-

ns

tCSH

CS(1:0) Hold Time

10

-

ns

SILICONSYSTEMS PROPRIETARY

This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.

All unauthorized use and/or reproduction is prohibited.

DOCUMENT: 3650H-02DSR

JUNE 17, 2008

PAGE 13

Image 25
Contents Overview FeaturesSisecure Host and/or software IPRevision History UpdatedDocument No Release Date Changes Table of Contents SSD-HXXXI-3650 Data Sheet Related Documentation Sales and Support Part NumberingSSD-HXXXI-3650 Data Sheet List of Figures List of Figures List of Tables ATA Command Block and Set Description Write Long Sectors 32h, 33h SSD-HXXXI-3650 Data Sheet Physical Dimensions Physical SpecificationsPin Locations System Power Requirements Product SpecificationsSystem Performance System ReliabilityEnvironmental Specifications Product Capacity Specifications047,674,880 046,240 2030 098,446,336 098,528 4066Pin Assignments Electrical SpecificationPin Signal Name Pins Type Description Signal DescriptionsData Inputs/Outputs. This is the 8-bit or Disk Active/Slave Present. This openController by -IORD and -IOWR. This signal DMA Request. This signal is used for DMAGround. The device ground signal Interrupt Request. This signal is an activeCapacitance Absolute Maximum RatingsSymbol Parameter 5V ±10% Units Minimum Maximum DC CharacteristicsO Access Read Timing Access Read TimingO Access Write Timing Access Write TimingTrue IDE Read/Write Access Timing True IDE Read/Write Access TimingTrue IDE Multiword DMA Read/Write Access Timing True IDE Multiword DMA Read/Write Access TimingATA and True IDE Register Decoding Task File Register SpecificationCS0# CS1# DA02 DA01 DA00 ATA Registers Error RegisterRead/Write Feature Byte Feature RegisterOperation Sector Count Register Read/Write Sector Count Default ValueRead/Write Sector Number RegisterLogical Block Number bits A07-A00 LBA Addressing Low Cylinder Low RegisterLogical Block Number bits A15-A08 LBA Addressing Logical Block Number bits A23-A16 LBA Addressing Cylinder High RegisterLBA27 LBA26 LBA25 LBA24 Drive/Head RegisterStatus Register Drive Write Fault DWF. Always set toCorrected Data CORR. Always set to Operation Read/Write ATA Command Code Command RegisterAlternate Status Register Operation Write Device Control RegisterNIEN Bits Description Device Address Register Read/Write NWTG NHS3 NHS2 NHS1 NHS0 NDS1 NDS0 Default ValueATA Command Block and Set Description ATA Command Block and SET DescriptionATA Command Set Class Command Name Registers Used CodeATA Command Set Check Power Mode 98h, E5h Check Power Mode 98h, E5hRegister Executive Drive Diagnostic 90h Executive Drive Diagnostic 90hFormat Track 50h Drive Head Number LBA27-24 Command 50hFormat Track 50h Identify Drive ECh Identify Drive EChIdentify Drive Drive Attribute Data Word Data Default Bytes Data Description AddressIdentify Drive Drive Attribute Data Idle 97h, E3h Idle 97h, E3hIdle Immediate 95h, E1h Idle Immediate 95h, E1hInitialize Drive Parameters 91h Initialize Drive Parameters 91hRecalibrate 1Xh Drive Command 1XhRecalibrate 1Xh Read Buffer E4h Read Buffer E4hRead DMA C8h Drive Head Number LBA27-24 Command C8hRead DMA C8h Read Multiple C4h Drive Head Number LBA27-24 Command C4hRead Multiple C4h Read Sector 20h, 21h Drive Head Number LBA27-24 Command 20h or 21hRead Sector 20h, 21h Read Long Sectors 22h, 23h Drive Head Number LBA27-24 Command 22h or 23hRead Long Sectors 22h, 23h Read Verify Sectors 40h, 41h Drive Head Number LBA27-24 Command 40h or 41hRead Verify Sectors 40h, 41h Seek 7Xh Drive Head Number LBA27-24 Command 7XhSeek 7Xh Set Features EFh Set Features EFhSet Features’ Attributes Feature OperationSet Multiple Mode C6h Set Multiple Mode C6hSet Sleep Mode 99h, E6h Set Sleep Mode 99h, E6hStandby 96h, E2h Standby 96h, E2hStandby Immediate 94h, E0h Standby Immediate 94h, E0hWrite Buffer E8h Write Buffer E8hWrite DMA CAh Drive Head NumberLBA27-24 Command CAhWrite DMA CAh Write Multiple C5h Drive Head NumberLBA27-24 Command C5hWrite Multiple C5h Write Sectors 30h, 31h Drive Head Number LBA27-24 Command 30h or 31hWrite Sectors 30h, 31h Write Long Sectors 32h, 33h Drive Head Number LBA27-24 Command 32h or 33hWrite Long Sectors 32h, 33h Erase Sectors C0h Drive Head Number LBA27-24 Command C0hErase Sectors C0h Extended Error Codes Description Extended Error CodesRequest Sense 03h Request Sense 03hTranslate Sector 87h Drive Head Number LBA27-24 Command 87hTranslate Sector 87h Wear-Level F5h Wear-Level F5hWrite Multiple w/o Erase CDh Drive Head Number LBA27-24 Command CDhWrite Multiple w/o Erase CDh Write Sectors w/o Erase 38h Drive Head Number LBA27-24 Command 38hWrite Sectors w/o Erase 38h Write Verify 3Ch Drive Head Number LBA27-24 Command 3ChWrite Verify 3Ch Part Numbering Sales and SupportPart Numbering Nomenclature 3650Part Number Capacity Part NumbersStandard Back Label with Lot Related DocumentationFront Label Code Information Related DocumentationClick here