SIIG 04-0341D manual Driver Installation, Windows 7 32-/64-bit, Windows Vista 32-/64-bit

Page 4

Driver Installation

This section provides information on how to install the CyberPro PCI 2S drivers.

Windows 7 (32-/64-bit)

1.Right click Computer, click Manage, click Device Manager.

2.Insert the driver CD. Right click PCI Serial Port, click Update Driver Software.

3.Click Browse my computer for driver software.

4.Type D:, then click Next. (Change D: to match your CD/DVD-ROM drive letter)

5.At Windows has successfully updated your driver software, click Close.

6Right click Other PCI Bridge Device, click Update Driver Software.

7.Repeat steps 3-5.

8.Right click CyberSerial Communication Port, click Update Driver Software.

9.Click Browse my computer for driver software.

10.Type D:, click Next. (Change D: to match your CD/ DVD-ROM drive letter)

11.At Windows has successfully updated your driver software, click Close.

12.Repeat steps 8-11 to complete the installation.

Windows Vista(32-/64-bit)

1.At the Found New Hardware window, insert the driver CD, click Locate and install driver software (recommended), then click Continue.

2.Click Next, then click Close.

4

Image 4
Contents Introducing the CyberPro PCI 2S Features and BenefitsSystemRequirements Jumper Settings JP1, JP2 PackageContentsLayout Hardware Installation Windows 7 32-/64-bit Driver InstallationWindows Vista 32-/64-bit Windows XP 32-/64-bit / Server 2003 32-/64-bit Windows Server 2008 32-/64-bitWindows2000 Windows ME To Verify Windows 2000 InstallationWindows 98 / 98SE Windows To Verify Windows ME / 98SE / 98 / 95 InstallationWindows NT To Verify Windows NT 4.0 Installation Changing COM Port Address Windows ME / 98SE / 98Technical Support and Warranty SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA #About SIIG, Inc Product Name