SIIG 04-0341D manual Windows2000

Page 6

To Verify Windows 7 / Vista / XP / Server 2003 & 2008Installation

1.Check in Device Manager to verify installation.

For Windows 7: Right click Computer, click Manage, then click Device Manager.

For Windows Vista: Right click Computer, click Manage,click Continue,thenclickDeviceManager.

For XP / Server 2003: Right click My Computer, click Manage, then click Device Manager.

For Server 2008: Right click Computer, click Manage, double click Diagnostics, then click Device Manager.

2.Click on the + (plus sign) in front of Ports (COM & LPT), CyberSerial 16Cxxx... should be displayed two times.

3.Double click Multifunction adapters, SIIG CyberPro 2S board should be displayed.

Windows2000

1.At the Found New Hardware Wizard, click Next.

2.Select Search for a suitable driver for my device (recommended), then click Next.

3.Check Specify a location, uncheck the other boxes, then click Next.

4.Insert the driver CD, type in D:\2000, then click OK. (Change D: to match your CD-ROM drive letter)

5.Click Next and Finish.

6.Repeat steps 1-5two more times.

7.Restart Windows to complete the installation.

6

Image 6
Contents Features and Benefits Introducing the CyberPro PCI 2SSystemRequirements PackageContents Jumper Settings JP1, JP2Layout Hardware Installation Driver Installation Windows 7 32-/64-bitWindows Vista 32-/64-bit Windows XP 32-/64-bit / Server 2003 32-/64-bit Windows Server 2008 32-/64-bitWindows2000 To Verify Windows 2000 Installation Windows MEWindows 98 / 98SE To Verify Windows ME / 98SE / 98 / 95 Installation WindowsWindows NT To Verify Windows NT 4.0 Installation Changing COM Port Address Windows ME / 98SE / 98Technical Support and Warranty SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA #About SIIG, Inc Product Name