SIIG 04-0341D Windows XP 32-/64-bit / Server 2003 32-/64-bit, Windows Server 2008 32-/64-bit

Page 5

3.Repeat step 2 to complete the driver installation.

Note: Windows Vista driver installation process may take several minutes to complete.

Windows XP (32-/64-bit) / Server 2003 (32-/64-bit)

1.At the Found New Hardware Wizard, insert the driver CD.

2.Select No, not this time, click Next. (Skip this step if not prompted)

3.Select Install the software automatically (Recommended), then click Next.

4.Click Finish.

5.Repeat steps 1-4two more times.

6.Restart Windows to complete the installation.

Windows Server 2008 (32-/64-bit)

1.At the Found New Hardware Wizard, click Locate and install driver software (recommended).

2.Insert the driver CD.

3.Click Don't search online.

4.Click I don't have the disc. Show me other options.

5.Click Browse my computer for driver software (advanced).

6.Type D:, then click Next. (Change D: to match your CD/DVD-ROM drive letter)

7.At The sofware for this device has been sucessfully installed, click Close.

8.Repeat steps 3-7 to complete the installation.

5

Image 5
Contents SystemRequirements Features and BenefitsIntroducing the CyberPro PCI 2S Layout PackageContentsJumper Settings JP1, JP2 Hardware Installation Windows Vista 32-/64-bit Driver InstallationWindows 7 32-/64-bit Windows Server 2008 32-/64-bit Windows XP 32-/64-bit / Server 2003 32-/64-bitWindows2000 Windows 98 / 98SE To Verify Windows 2000 InstallationWindows ME Windows NT To Verify Windows ME / 98SE / 98 / 95 InstallationWindows To Verify Windows NT 4.0 Installation Windows ME / 98SE / 98 Changing COM Port AddressSIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc