Schumacher PS-500-1A Operating Instructions, Using AS a Jump Starter, Using the White Spotlight

Page 5

OPERATING INSTRUCTIONS

USING AS A JUMP STARTER

1.Make sure the ON/OFF switch is in the OFF position.

2.Use safety glasses to shield eyes while making the connec- tions.

3.Connect the Red (+) Positive clamp to the Positive battery post first.

4.Connect the Black (-) Negative clamp to the engine or chassis to ground.

5.If the unit alarm is sounding, the leads are connected wrong or shorted. Change the connec- tions.

6.If after making the connections, the audio sound is not present, turn the ON/OFF switch to ON position.

7.Crank your vehicle’s engine. If the engine fails to start, wait 3 minutes for the battery to cool down and try again.

8.After the engine starts, turn the ON/OFF switch to OFF position. Disconnect the Black (-) clamp from the engine or chassis and then disconnect the Red (+) clamp from your vehicle’s bat- tery post.

USING THE EMERGENCY FLASHING LIGHT

The red emergency light located on the top left side of the unit can be started by pushing the ON/OFF switch located below the red light. This light is a flashing light. To stop the light simply push the switch to the OFF position.

USING THE WHITE SPOTLIGHT

The spotlight is located on the top right side of the unit. This light can be adjusted downward by pulling the tab at the top. The control switch for this light is located beneath the light.

LED LIGHTS

Four LED lights are on the front panel and will indicate the inter- nal battery status condition when the square red switch is pushed. The charger should not be on at this time.

1.The 1st red LED indicates a very low battery nearing 0%. The battery should be re- charged immediately.

2.The 2nd red LED indicates the battery condition is below 12.5 or 25% or less and should be recharged.

3.The yellow LED lights indicat- ing the voltage is between 12.5–12.7 or 50–75% and can be used but should be re- charged soon.

4.The green LED indicates full charge.

5

Image 5
Contents Instant Power Plus Table of Contents Important Safety Instructions LOW Voltage Battery Alarm Before Using Power SourceSetting the Controls OperationUsing the Emergency Flashing Light Using AS a Jump StarterUsing the White Spotlight Operating InstructionsVolt DC Receptacle Front Volt Power Inverter Receptacle BackPower Inverter Mounting Storage Limited Warranty For Information about troubleshooting

PS-500-1A specifications

The Schumacher PS-500-1A is a state-of-the-art power supply and battery charger that stands out in the automotive accessories market. Designed for both professional mechanics and automotive enthusiasts, this versatile device offers a range of features and advanced technologies that make it a top choice for vehicle maintenance and battery care.

One of the standout features of the Schumacher PS-500-1A is its ability to deliver a dependable and adjustable output. With a power rating of 500 watts, this unit can provide the necessary power for jump-starting vehicles, charging batteries, and powering electrical accessories. Its parallel mode allows users to connect two devices simultaneously, making it ideal for servicing multiple vehicles or tools quickly and efficiently.

The device comes equipped with a smart microprocessor that intelligently monitors the charging process. This technology not only prevents overcharging by automatically switching to a maintenance mode once the battery is fully charged, but it also optimizes the charging cycle for different types of batteries. The Schumacher PS-500-1A is compatible with both 6V and 12V batteries, including gel, AGM, and flooded types, catering to a wide range of vehicle models.

Another significant characteristic of the PS-500-1A is its user-friendly interface. The LED display provides real-time information on the charge level and status, making it easy for users to operate and monitor the device. Additionally, the built-in safety features, such as reverse polarity protection, short circuit protection, and overcurrent protection, ensure a safe charging experience.

Portability is another advantageous aspect of the Schumacher PS-500-1A. The compact and lightweight design allows for easy transport and storage. Its durable casing is built to withstand the rigors of workshop and outdoor environments, ensuring longevity and reliability.

In conclusion, the Schumacher PS-500-1A is a powerful, efficient, and versatile power supply solution that meets the demands of modern automotive maintenance. With its advanced charging technology, compatibility with various battery types, user-friendly design, and robust safety features, it represents an excellent investment for anyone looking to keep their vehicles in optimal condition. Whether for professional use or personal projects, the Schumacher PS-500-1A proves to be a valuable asset in the garage.