Tannoy CMS801 PI Wiring and Setting UP, CMS801 DC BM Dimensions, CMS801 DC PI Dimensions

CMS	6. WIRING AND SETTING UP:
		1	Open the wiring cover at the back of the speaker can to access the Euro type connector
			plug and socket.

7.1 CMS801 DC BM DIMENSIONS:

TEMPLATE HOLE CUTOUT SIZE: 295mm

310.5

327.8

286.4

[12.22"]

[12.90"]

[11.27"]

2For connection to an amplifier, use pins 1 and 2:

•Pin 1 is positive

•Pin 2 is negative

5.0

[0.20"]

325.0

[12.80"]

For connection to additional speakers in a distributed line, pins 3 and 4 are in parallel where:

•Pin 3 is negative

•Pin 4 is positive

7.2 CMS801 DC PI DIMENSIONS:

TEMPLATE HOLE CUTOUT SIZE: 295mm

3Close the wiring cover and tighten both screws on the cable clamp. Use the rotary switch located on the front of the unit to select whether you wish to use the speaker in a low-impedance or distributed-line application.

THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOW IMPEDANCE.

All CMS801 models use a 60W transformer. When using distributed-line systems, the transformer can be tapped at 60W, 30W and 15W, with an additional 7.5W tapping for 70.7V line systems.

118.7

[4.67"]

5.0

[0.20"]

7.3CMS801 sub BM DIMENSIONS:

286.4

[11.27"]

325.0

[12.80"]

10

TEMPLATE HOLE CUTOUT SIZE: 295mm

	327.8	286.4
310.5		[11.27"]
	[12.90"]
[12.22"]

18.5	325.0
	[12.80"]
[0.73"]	11