Velocity Micro Creating a SEAL-IT 100 profile, Before you start, Click Create a new profile

Page 33

Chapter 2: SEAL-IT 100

SEAL-IT 100 Device Driver User Guide

Creating a SEAL-IT 100 profile

About this topic	This topic describes how to create a profile for the SEAL-IT 100.
	Read this topic if you are an administrator responsible for setting up
	devices in VWorks or BenchWorks.
Before you start
	Before you create a profile, you must have added the SEAL-IT 100 to the
	device manager.
Procedure
	To create a SEAL-IT 100 profile:
	1.	Open ABgene SEAL-IT 100 Diagnostics.
	2.	Click the Profiles tab.

3.In the Serial port list, select the number of the COM port that the SEAL-IT 100 is using.

4.Click Create a new profile.

5.In the Create Profile dialog box, enter a name for the profile and click OK.

The name appears in the Profile name box.

6.In the Profile Settings area, set the following:

Setting	Comments

Plate length	Length of the plate, measured across
	the top.

Load position	Distance that the dive board is moved
	out for pick up of the plate by the
	robot.

29

Image 33

Contents July VWorks3 and BenchWorks SEAL-IT 100 Device Driver User GuideCopyright 2007 Velocity11 Contents Table of Contents Introduction1 Who should read this guide Job rolesRelated topics About Velocity11 user guides Where to find user information Online helpAbout this topic To open the online helpPrinting and searching More information Also read What this guide coversDriver version What this guide does not coverAbout devices Device definedDevice file defined About device drivers What functions do the device drivers provide? Related topics IWorks interfaceInstalling device drivers ProcedureTo install device drivers Adding devices To add devices to a device fileClick the Device Manager tab About diagnostics BackgroundSelect File Device File Save To open Diagnostics Opening diagnosticsIf you are using VWork3 or BenchWorks software Related topics Stored settings About profilesProfiles defined Setting the properties for a device Before you start Setting general propertiesTo set the general properties for a device Setting location properties Setting teachpointsOpen the Device Properties Teachpoint for robot robot’s name. Choose a fileSetting the Use linked location Adding and linking Sub Process tasks Sub Process task defined Adding a SubTo link the Sub Process task to the correct sub-process Pipette Process Editor, select the Sub Process link icon To link a Sub Process task to a deviceWhere scripts are written Using JavaScript to set task parametersPlug-in default About reader output filesOutput file Example Profile default output file name Filename suffixesOverriding output file names with tasks About device initialization Homing motors Setting profile parametersIntroduction SEAL-IT Workflow Workflow for configuring the SEAL-ITCreating a SEAL-IT 100 profile Open ABgene SEAL-IT 100 DiagnosticsBefore you start To create a SEAL-IT 100 profileRelated topics Setting SEAL-IT 100 task parameters Setting Seal Plate SEAL-IT 100 task parametersTo set the Seal Plate ABgene SEAL-IT 100 task parameters Managing profiles To manage SEAL-IT 100 profiles Managing SEAL-IT 100 profilesOpen SEAL-IT 100 Diagnostics Operating the SEAL-IT 100 with diagnosticsBefore you start Sealing and trimming a plate To initialize the SEAL-ITProfiles tab