Velocity Micro SEAL-IT 100 manual Profiles tab

Page 38

34

Chapter 2: SEAL-IT 100

SEAL-IT 100 Device Driver User Guide

To seal or trim a single plate using ABgene SEAL-IT 100 diagnostics:

1.Open ABgene SEAL-IT 100 Diagnostics.

2.Click the Controls tab.

3.If the SEAL-IT 100 is not initialized, click Initialize this profile on the

Profiles tab.

4.To seal a plate and cut (trim) the seal from the roll, click Seal.

5.To trim the seal roll, click Trim.

You might do this after first loading a roll of seal.

Note: The parameters set in the profile are used for the sealing and trimming operations.

Related topics

For more information about...	See...

Opening diagnostics	“Opening diagnostics” on page 12

The workflow for configuring the	“Workflow for configuring the SEAL-IT
SEAL-IT 100	100” on page 28

Creating a SEAL-IT 100 profile	“Creating a SEAL-IT 100 profile” on
	page 29

Managing SEAL-IT 100 profiles	“Managing SEAL-IT 100 profiles” on
	page 32

Initializing a device	“About device initialization” on page 25

Image 38

Contents SEAL-IT 100 Device Driver User Guide July VWorks3 and BenchWorksCopyright 2007 Velocity11 Contents Table of Contents Introduction1 Related topics Who should read this guideJob roles About this topic Where to find user information Online helpAbout Velocity11 user guides To open the online helpPrinting and searching More information Driver version What this guide coversAlso read What this guide does not coverDevice file defined About devicesDevice defined About device drivers IWorks interface What functions do the device drivers provide? Related topicsTo install device drivers Installing device driversProcedure Click the Device Manager tab Adding devicesTo add devices to a device file Select File Device File Save About diagnosticsBackground Opening diagnostics To open DiagnosticsIf you are using VWork3 or BenchWorks software Related topics Profiles defined Stored settingsAbout profiles To set the general properties for a device Setting the properties for a deviceBefore you start Setting general properties Open the Device Properties Setting teachpointsSetting location properties Teachpoint for robot robot’s name. Choose a fileSetting the Use linked location To link the Sub Process task to the correct sub-process Adding and linking Sub Process tasksSub Process task defined Adding a Sub To link a Sub Process task to a device Pipette Process Editor, select the Sub Process link iconUsing JavaScript to set task parameters Where scripts are writtenOutput file Plug-in defaultAbout reader output files Profile default output file name Filename suffixes ExampleOverriding output file names with tasks Homing motors Setting profile parameters About device initializationIntroduction SEAL-IT Workflow for configuring the SEAL-IT WorkflowBefore you start Open ABgene SEAL-IT 100 DiagnosticsCreating a SEAL-IT 100 profile To create a SEAL-IT 100 profileRelated topics To set the Seal Plate ABgene SEAL-IT 100 task parameters Setting SEAL-IT 100 task parametersSetting Seal Plate SEAL-IT 100 task parameters Managing SEAL-IT 100 profiles Managing profiles To manage SEAL-IT 100 profilesBefore you start Sealing and trimming a plate Operating the SEAL-IT 100 with diagnosticsOpen SEAL-IT 100 Diagnostics To initialize the SEAL-ITProfiles tab