Velocity Micro SEAL-IT 100 manual Setting the Use linked location

Page 22

18

Chapter 1: Introduction

SEAL-IT 100 Device Driver User Guide

Setting the Use linked location

3.Some software device drivers only. Set the Approach height and

Allowed/prohibited labware. Follow the procedure in “Setting general properties” on page 16.

4.Set the Barcode Readers location. Follow the procedure in “Setting barcode location” on page 17.

5.Assign the Labware used by the location by selecting the correct labware type from the list.

6.In the Device Properties, select the desired profile if it is not already selected.

7.Select File > Device File > Save to save the changes to the device file.

Currently, this feature is enabled for the special situations in which there is a storage device such as a PlateHub Carousel, StoreX, or Cytomat and a robot, such as the Velocity11 Translator robot that is shuttling plates between systems.

To use this feature, select yes and then select the device location to which you want to link. This tells the software that the current device location is the same physical location as the device selected from the Device to use list.

Note: Selecting this option when it is not enabled will have no effect on the system.

Related topics

For information about...	See...

Device drivers	“About device drivers” on page 7

Installing a device driver plug-in	“Installing device drivers” on page 9

Profiles	“About profiles” on page 15

Adding a device to the device	“Adding devices” on page 10
manager

Opening diagnostics	“Opening diagnostics” on page 12

Image 22

Contents SEAL-IT 100 Device Driver User Guide July VWorks3 and BenchWorksCopyright 2007 Velocity11 Contents Table of Contents Introduction1 Job roles Who should read this guideRelated topics About this topic Where to find user information Online helpAbout Velocity11 user guides To open the online helpPrinting and searching More information Driver version What this guide coversAlso read What this guide does not coverDevice defined About devicesDevice file defined About device drivers IWorks interface What functions do the device drivers provide? Related topicsProcedure Installing device driversTo install device drivers To add devices to a device file Adding devicesClick the Device Manager tab Background About diagnosticsSelect File Device File Save Opening diagnostics To open DiagnosticsIf you are using VWork3 or BenchWorks software Related topics About profiles Stored settingsProfiles defined Before you start Setting general properties Setting the properties for a deviceTo set the general properties for a device Open the Device Properties Setting teachpointsSetting location properties Teachpoint for robot robot’s name. Choose a fileSetting the Use linked location Sub Process task defined Adding a Sub Adding and linking Sub Process tasksTo link the Sub Process task to the correct sub-process To link a Sub Process task to a device Pipette Process Editor, select the Sub Process link iconUsing JavaScript to set task parameters Where scripts are writtenAbout reader output files Plug-in defaultOutput file Profile default output file name Filename suffixes ExampleOverriding output file names with tasks Homing motors Setting profile parameters About device initializationIntroduction SEAL-IT Workflow for configuring the SEAL-IT WorkflowBefore you start Open ABgene SEAL-IT 100 DiagnosticsCreating a SEAL-IT 100 profile To create a SEAL-IT 100 profileRelated topics Setting Seal Plate SEAL-IT 100 task parameters Setting SEAL-IT 100 task parametersTo set the Seal Plate ABgene SEAL-IT 100 task parameters Managing SEAL-IT 100 profiles Managing profiles To manage SEAL-IT 100 profilesBefore you start Sealing and trimming a plate Operating the SEAL-IT 100 with diagnosticsOpen SEAL-IT 100 Diagnostics To initialize the SEAL-ITProfiles tab