O3350 IG 19496 Book.book Page 21 Wednesday, April 5, 2000 10:30 PM
Omni 3350 Installation Guide
Figure 13 Using an MSAM Cardholder
8.Remove any
9.Install an MSAM card by aligning the card and carefully sliding it within the guides on the cover until fully inserted.
Note: The cardholder connector base has a set of contacts and a notch post on one corner to ensure the MSAM card is positioned correctly when the cover is closed. The MSAM card has a notch on one corner to ensure it fits into the connector base in only one way. Before inserting the MSAM card, position it as shown in Figure 13, with the card’s gold contacts facing the terminal’s base.
10.Pivot the cover into its connector base (Figure 13).
11.Lock each MSAM cardholder by sliding its locking plate, as shown by the LOCK arrow, until the plate stops (Figure 12).
21