VeriFone 3350 manual Connect the Terminal to a Telephone Line, Telco, ISDN, Dial/Leased-Line Port

O3350 IG 19496 Book.book Page 11 Wednesday, April 5, 2000 10:30 PM

Omni 3350 Installation Guide

Telset Port (High-Speed Modem Terminal only)

The first port is identified by a telephone-shaped “Telset” icon (shown at right). Use this port to connect a telephone to the Omni 3350.

Telco, ISDN, Dial/Leased-Line Port

The second port is identified by the icon shown at right. Use this port to connect the Omni 3350 to a telephone wall jack.

Ports for Attaching Optional Peripherals Devices:

In the center are two RJ45-type modular jacks (serial ports):

• The “RS232” serial port (icon shown at right) connects a VeriFone CR 600 check reader or other peripheral device.

•The other serial port (identified by “Bar Code” and “PIN Pad” icons at right) connects a PIN pad, smart card reader, or bar code wand.

Power Connection Port

•On the lower right is a round port with a lock notch for securely connecting the terminal to a power source (identified by the “electrical power” icon at right).

Step 4: Connect the Terminal to a Telephone Line

1.Direct connection — A telephone cord runs from the Telco, ISDN, Dial/Leased-Line Port on the terminal directly to a telephone wall jack (Figure 4). With a direct connection, the line is dedicated to the terminal.

11