Unitech Hand Held Scanner user manual Qualifier, Input ID Format

Page 25

b) String Parameters

A string is a set of characters, wild characters, or sequence of adjacent characters enclosed in double quotation marks, which are on the Programming Sheet. For example:

"A*B# "

Here * and # are wild characters on the setup sheet.

7.4. Qualifier

There are three conditional fields in the Qualifier:

Input ID, Length and Match.

7.4.1.Input ID Format:

IN_ID,ID1, ... ,IDi,

Input ID is required and the original data record must correspond to Input ID of a formula in order to be processed.

ID1 to IDi are represented by digits. The following Input IDs are available:

0= Code 39 Full ASCII

1= Code 39 Standard

2= EAN 13

3= EAN 8

4= UPC A

5= UPC E

6= I 2 of 5

7= Codabar

8= Code 128

9= Code 93

10= S 2 of 5

11= MSI

19= UCC/EAN128

28= All Inputs

There is no limitation on the number of IDs to be defined. Example:

IN_ID,0,11,

means the original data can be Code 39 or MSI.

Page 24

Image 25

Contents User’s Manual RS232 Serial Interface PIN Assignment and Specification Chapter Overview Installation procedures InstallationKeyboard Interface Installed on Macintosh Installed on PC/AT without keyboard or laptop computerIntercharacter Delay Installed as an USB InterfaceInterblock Delay Understanding the Operating ParametersFunction Code Alt Key ModeCaps-Lock RS232 Serial Interface Installed as a Serial InterfaceBaud Rate, Parity and Data Bit Device TypeHandshaking BCC Character Serial TTLTime Out Terminal Interface Installing as a Terminal WedgeData Direction Code 39 Output Wand EmulationNative Output Level Duration of Minimum Width Appendix D Output of Wand Emulation Appendix DPolarity of Idle Appendix D Bar Code Menu Setup Chapter SetupSetup Procedures Code ID Setting Bar Code Length SettingPredefined Labels PreamblePrefix and PostambleSuffixBatch Setup Quick SetupI800C06D51DJ8 08080A0O7C005354 I800C06D51DJ8080 80A0O7C005354415254 General Output Data EditingFormula Programming Sequence ProgrammingInputIDLengthMatchA-StringO-String...O-String Enter PreparationParameter Entry Programming SheetInput ID Format QualifierMatch Format LengthString Format ModifierExamples Advanced FeaturesExample Example Pin Number Signal Pin Assignment and SpecificationPin Assignments Keyboard InterfaceNumber PinTTL RS232 Interface Standard RS232 InterfaceTerminal Interface Host Side connectorPin Number Signal Terminal Side connectorWand Emulation Specification A.1 A.2 Device Selection and Default Appendix D. Setup MenuDevice ID Device Type MPU Idle Status Beeps and DelaysKeyboard Wedge Settings RS232 Settings Define Code ID Scanner PortMagnetic Reader Reserve Code 39 / I 2 of 5 / S 2 of 5 / Code 32 / EAN128MSI /Pleasey Code Code 128 / MSI Code / Code 93 / Codabar/ Label CodeUPC-E UPC / EAN / Delta CodeData Editing Dump Setup Strings E.1 Appendix E. Full Ascii ChartE.2 E.3 E.4 Appendix F. Bar Code Test Chart