Uniden UBC3500XLT owner manual Basic Operation, Turning On the Scanner and Setting the Squelch

UB347ZH.fm Page 31 Thursday, August 31, 2006 11:57 AM

Basic Operation

Turning On the Scanner and Setting the Squelch

Scroll

Control

Note: Make sure the scanner's antenna is connected before you turn it on.

1.Press and hold for about 2 seconds to turn on the scanner.

2.Briefly press the scroll control

once. VOLUME LEVEL and a	Amateur Radio
number appear on the display.	145.2000MHz

3.While VOLUME LEVEL appears, rotate the scroll control to set the volume to a comfortable listening level.

Note: If you do not press any key or turn the scroll control within about 10 seconds, VOLUME LEVEL disappears. If this happens, simply press the scroll control again.

4.While holding down Func on the left side of the scanner, briefly press the scroll control once. SQUELCH LEVEL and a number appear on the display.

5.While SQUELCH LEVEL appears, rotate the scroll control to set the squelch to the level you want.

Note: If you do not press any key or turn the scroll control within about 10 seconds, SQUELCH LEVEL disappears. If this happens, hold down Func and the scroll control again.

Basic Operation

31