Uniden UBC3500XLT owner manual Locking/Unlocking Channels, Temporarily Holding On a System

Func .

UB347ZH.fm Page 34 Thursday, August 31, 2006 11:57 AM

Locking/Unlocking Channels

Follow these steps to lock out a channel so that it does not scan even if its system and channel group are selected.

1.While holding down Func , rotate the scroll control to select the system where the channel is stored.

2.Release Func then press Hold within 2 seconds to hold on the system.

3.Rotate the scroll control to select the channel you want to lock or unlock.

4.Press L/O to lock or unlock the channel.

You can also lock out an active channel by pressing L/O while the scanner is stopped on the channel.

Temporarily Holding On a System

To temporarily hold on a system, press and hold To hold on a different system, continue to hold Func and rotate the scroll control to select the system. Normal scanning resumes 2 seconds after you release

Func .

Holding On a Channel

To hold on a channel, press Hold while the channel is active. To select a different channel, rotate the scroll control. If you scroll past the beginning or end of the current system, the scanner selects channels in the previous or next system. To resume scanning, press Scan.

Quick-Storing Channels

1.Hold on an existing channel in any system.

2.Enter the frequency you want to store.

3.To quick-store the channel, press E. Otherwise, press .

If you enter a frequency then press E, the scanner stores it in the Qck Save Grp group in a system

34