Uniden UBC3500XLT Wired Cloning, Wired Clone, Master scanner Clone Master Press Scan Key

UB347ZH.fm Page 42 Thursday, August 31, 2006 11:57 AM

Wired Cloning

Menu

Wired Clone

•Master Sets the scanner to be the source scanner.

•Slave Sets the scanner to be the recipient scanner.

To clone (copy) data directly from one UBC3500XLT scanner to another UBC3500XLT scanner, you must first connect the scanners to each other using the included connection cables and a DB9 null modem adapter and DB9 gender changer (neither included), available at most computer stores. Then you must set one scanner as the source and the other as the destination.

Plug the smaller end of each of the included connection cables into Remote on the right side of each scanner. Then connect the other end of the cables together using the null modem connector and gender changer.

Then set the scanner containing the programming you want to transfer as the master scanner, then set the other scanner as the slave scanner.

(Master scanner) Clone Master Press SCAN Key

Scan

(Slave scanner) Clone Slave Press SCAN Key

Scan

When you are ready to clone the scanner, press Scan on the slave scanner first, then on the master scanner. The master scanner checks the connection between the two scanners, then transfers its data to the slave scanner.

When the transfer is complete, Complete appears on both scanners. If the transfer did not work, Error appears on the master scanner.

42