Uniden UBC3500XLT owner manual Editing a Service Search, Search for Edit Service

UB347ZH.fm Page 62 Thursday, August 31, 2006 11:57 AM

custom search range to lock or unlock by rotating the scroll control with pressing Func .

Set Hold Time - lets you set the amount of time to hold the custom search range during scanning. You can set Hold time from 0 to 255 seconds.

Notes:

•If you select 0, the scanner then searches the entire range one time.

•The default setting is 2 seconds for each search range.

•The scanner moves to the next system or search range after the hold time expires, any current transmission ends, and the channel delay time expires.

Editing a Service Search

You can change the way service search works for each service.

Menu

Search for ...

Edit Service

Select your setting, then press the scroll control.

•Set Delay Time This setting determines how long the scanner waits after a transmission ends before resuming quick search or Close Call operation. Select your setting, then press the scroll control.

Off The scanner resumes immediately when the transmission ends.

1-5 sec The scanner waits the set amount of time after the transmission ends before resuming.

•Set Attenuator This setting controls the attenuator for search operation. Select your setting, then press the scroll control.

62