Uniden UBC69XLT manual Scanning the Stored Channels

Page 26

UB334 Paper OM reduced size.fm Page 26 Friday, September 9, 2005 11:16 AM

2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.

•If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press Clr then enter the correct frequency. To enter the frequency anyway, press E to accept.

4.To program the next channel in sequence, press E/Pgm then repeat Steps 2 and 3.

Searching For and Temporarily Storing Active Frequencies

If you do not have a reference to frequencies in your area, use a search to find a transmission.

Note: When the scanner starts searching, it auto- matically turns on the delay function. To turn delay on or off, press Func + Dly.

Scanning the Stored Channels

To begin scanning channels, press Scan.

The scanner scans through all non-locked channels (See “Locking Out Channels” on Page 33). When the scanner finds a transmission, it stops on it. When the transmission ends, the scanner resumes scanning.

Operation

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents C 6 9 X L T S C a N N E R Precautions PrecautionsUBC69XLT Controls and Display UBC69XLT Controls and DisplayContents Contents Introduction IntroductionMilitary Land 30.0000 Feature Highlights Feature HighlightsAbout This Manual Understanding Scanning What is Scanning?What is Searching? Conventional ScanningSimplex Operation Where To Obtain More Information Information On The InternetIncluded With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Setting Up Your Scanner Connecting the Antenna Connecting an Optional AntennaConnecting an Earphone/Headphone Connecting an Extension SpeakerAttaching the Belt Clip About Your Scanner About Your ScannerLook At The Keypad Hold Dly Look At The Display About Your Scanner Storing Known Frequencies Into Channels Turning On The Scanner Setting SquelchOperation OperationScanning the Stored Channels Searching For and Temporarily Storing Active FrequenciesManually Selecting a Channel Chain Search Special FeaturesSpecial Features Chain Search Mode Setting the Search Range Search Skip Memory Delay Locking Out Channels PriorityUsing Keylock Using the Display BacklightTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Care and Maintenance Care and MaintenanceCleaning General UseRepairs BirdiesSpecifications Specifications68mm W x 31.5mm D x 115mm H Optional Accessories Optional AccessoriesDeclaration of Conformity Declaration of ConformityUniden Corporation All rights reserved UBZZ01334ZZ0
Top Page Image Contents