UB334 Paper OM reduced size.fm Page 32 Friday, September 9, 2005 11:16 AM
Notes:
•If you selected all frequencies to be skipped within the search range, the scanner beeps 3 times and does not search.
•If you select more than 50 frequencies to skip, each new frequency replaces a frequency previously stored, beginning with the first stored frequency.
•Press Func + 
or Func + 
to select a skipped frequency while Hold appears. L/O appears when you select a skipped frequency.
Delay
Sometimes a user might pause before replying to a transmission. To avoid missing a reply on a specific channel, you can program a
2 seconds after the transmission stops before resuming scanning or searching. The scanner automatically sets a delay when you store frequencies into channels or when you search frequencies. When the delay feature is on, DLY appears. If it is off, follow one of these steps to program a delay depending on how the scanner is operating,.
•If the scanner is scanning and stops on an active channel where you want to store a delay, quickly press Func + Dly before it continues scanning again. DLY appears.
•If the desired channel is not selected, manually select the channel, then press Func + Dly. DLY appears.
Special Features
32