UB334 Paper OM reduced size.fm Page 31 Friday, September 9, 2005 11:16 AM
Func + 
for about 1 second to quickly move through the search bank numbers.
After choosing the search bank, follow these steps to set the lower limit and upper limit frequency.
1.Enter the lower limit frequency by using the 
/Clr keys.
2.Press E to select the lower limit frequency.
3.Enter the upper limit frequency by using the 
/Clr keys.
4.Press E to select the upper limit frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a search. This lets you avoid unwanted frequencies or those already stored in a channel.
To skip a frequency, press Func and L/O when the scanner stops on the frequency during a search or a search hold. The scanner stores the frequency in memory and automatically resumes the search if it is not in hold.
Follow these steps to clear a single frequency from skip memory so the scanner stops on it during a search.
1.Press Hold to stop the search.
2.Press Func + 
or Func + 
to select the frequency. L/O appears.
3.Press Func + L/O. L/O disappears.
To clear all the skip frequencies at once while searching or search hold, press Func then press and hold L/O until the scanner beeps.
Special Features
31