Uniden UBC69XLT manual Chain Search Mode

Page 29

UB334 Paper OM reduced size.fm Page 29 Friday, September 9, 2005 11:16 AM

BAND PLAN 3

Bank	Frequency (MHz)		Step (kHz)
No.
1	25.0000 - 29.9950		5
2	160.6000	- 162.5950	5
3	162.6000	- 173.9950	5
4	440.0000	- 465.99375	6.25
5	466.0000	- 469.99375	6.25

See page 8 for how to switch the band between 1, 2 and 3.

Chain Search Mode

Press Func + Src to start chain search mode. SRCH, the enabled search bank number, and or (indicating the search direction) appear. The search bank number being searched flashes.

Press 1-5to enable or disable the search bank number being searched in this mode. Enabled bank numbers appear. (Disabled bank numbers disappear).

At least one search bank must be enabled. (The scanner sounds an error tone if you try to disable all the search banks). The search bank and the frequency where chain search starts depends on how the scanner was set before you selected chain search mode.

Chain Search Hold Mode

To start chain search hold mode, press Hold in chain search mode. The scanner stops searching and Hold appears. In this mode, pressing

Func + changes the search direction downward and pressing Func + changes the search

Special Features

29

Image 29

Contents C 6 9 X L T S C a N N E R Precautions PrecautionsUBC69XLT Controls and Display UBC69XLT Controls and DisplayContents Contents Introduction IntroductionMilitary Land 30.0000 Feature Highlights Feature HighlightsAbout This Manual What is Searching? What is Scanning?Understanding Scanning Conventional ScanningSimplex Operation Information On The Internet Where To Obtain More InformationIncluded With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Setting Up Your Scanner Connecting an Optional Antenna Connecting the AntennaConnecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip About Your Scanner About Your ScannerLook At The Keypad Hold Dly Look At The Display About Your Scanner Operation Turning On The Scanner Setting SquelchStoring Known Frequencies Into Channels OperationSearching For and Temporarily Storing Active Frequencies Scanning the Stored ChannelsManually Selecting a Channel Chain Search Special FeaturesSpecial Features Chain Search Mode Setting the Search Range Search Skip Memory Delay Priority Locking Out ChannelsUsing the Display Backlight Using KeylockTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Cleaning Care and MaintenanceCare and Maintenance General UseBirdies RepairsSpecifications Specifications68mm W x 31.5mm D x 115mm H Optional Accessories Optional AccessoriesDeclaration of Conformity Declaration of ConformityUniden Corporation All rights reserved UBZZ01334ZZ0