3.In SCAN or SEARCH Mode, press 
to stop scanning. (HOLD appears on the display.)
In Manual mode, press 
to step up the channel.
4.NUMERIC KEYPAD — Use these keys to program a channel for scanning. Also use to access a channel
directly with 
. During SCAN Mode, use these keys to select or deselect any of the 10 memory banks. (Only the selected bank indicator(s) appear on the display.)
Note: You cannot deactivate all 10 banks at the same time.
Key Bank Channel
1 1 - 10
2 11 - 20
3 21 - 30
4 31 - 40
5 41 - 50
6 51 - 60
7 61 - 70
8 71 - 80
9 81 - 90
10 91 - 100
5.Press 
/BAND to start Limit search.
Press and hold 
/BAND to select the band for
band search. Then press 
/BAND again to start band search.
6.Press 
to stop Band serch, Limit search and WX
scan. Also, press it to move to next higher channel or
frequency. Press and hold 
to change the search direction to upper side.
7.In Limit search, input the frequency and press 
to program the lower/higher frequency. Press 
to stop Band search, Limit search, and WX scan.
Also, press it to move to next lower channel or
frequency. Press and hold 
to change the search direction to lower side.
8