To access a specific channel:
1.Press 
.
2.Enter the channel number using the numeric keys.
3.Press 
again.
Priority Scan
The SportCat has 10 Priority Channels, 1 per Bank. Initially these are the first channel in each Bank. (e.g. Channel 1, Channel 11, Channel 21, and so on.) In priority scan mode, the scanner checks the Priority Channel(s) every 2 seconds during the Scan cycle. If a transmission is received, the scanner will stop at that channel. If the Priority Channel in any Bank is “Locked Out”, it will be skipped during scanning.
You can move the Priority to any other channel in a Bank as follows:
1.Go directly to that channel using any of the methods described above.
2.Press and hold 
for at least 2 seconds. You will hear “two beeps,” andP will appear on the display to the left of the new channel number. That channel will now be the Priority Channel for that Bank. (The P will no longer appear for the previous Priority Channel.)
To activate Priority Scan, press 
. The PRIORITY indicator will appear at the bottom of the display. To
deactivate Priority Scan, press 
again. The PRIORITY indicator will disappear from the bottom of the display.
Delay
Normally the scanner will resume scanning when a transmission stops. If you want to remain on a channel until a responding transmission is received, activate the DELAY feature. This feature can be active in SCAN, MANUAL, SEARCH, and WEATHER Modes.
1.Press 
. The DELAY indicator appears on the display. The scanner will now pause 2 seconds after transmission stops before resuming scanning.
2.Press 
again to deactivate Delay. The DELAY indicator disappears from the display.
19