Controls and Indicators
Top View
Antenna | Connect the rubber antenna to the BNC |
Connector | connector and turn clockwise until it locks. |
Earphone | Plug the supplied earphone into this jack |
Jack | for private listening. When the earphone is |
| connected, the internal speaker is |
| disconnected. |
| Note the warning on the Inside Front Cover |
| and on page 11. |
SQUELCH | Adjust this control to set the scan threshold |
Control | and to eliminate the background rushing |
| noise heard in the absence of an incoming |
| signal. See the Operation Overview |
| Section for adjustment procedures. |
Use this control to turn the scanner on or | |
VOLUME | off, and to adjust the volume. |
Control |
|
VFO Control | Use this control to select channels in |
| Manual mode, select the band for Band |
| Search, and select frequencies in |
| Band/Limit Search mode. You can also |
| use this to program Alpha Name |
| characters. |
Front View
(Refer to the illustration on page iii)
1.LCD DISPLAY — The liquid crystal display (LCD) shows the current channel and frequency. It also displays the mode, status, and bank indicators.
A.Priority Channel Indicator — P appears when the scanner stops on a Priority Channel.
6