Care and Maintenance
Replacing the Battery Pack
1.Turn the
2.Turn the scanner over
so you are looking at the back. If the Belt clip is attached, remove it by taking out the two screws.
3. Press in on the ribbed area and slide the Battery Cover down and off.
4.Carefully unplug the Battery pack and lift it out of the case. You may need to exert slight pressure toward the top of the scanner as you slide the Battery Pack out of the case.
5.Carefully plug in the new Battery Pack, observing the proper polarity. (The RED wire should be on the upper side as you plug it in.) Although the plug is keyed to reduce the chance of inserting it in wrong, make sure the wires are in the correct position before pushing it in all the way. DO NOT FORCE THE PLUG.
24