Note: If the frequency of the channel has not been programmed, you cannot program the Alpha Name on the channel.
4.To select the edit position, press 
to move the Edit
cursor to the right or 
to move it to the left.
5.Select the character using VFO Control. Turn clockwise to move 0 - 9, A - z and other characters and stop the control at the letter you wish to store.
6.Repeat the steps 4 and 5 for all the characters you want to program.
7.When you complete the input, press
. The words you have programmed flash twice.
Alert Beep Setting
When a transmission occurs on a channel on which you have set the Alert Beep function, 2 beeps will let you know that your “favorite” channel has been received.
You can set this function for each channel. Select a
channel, then press and hold 
/ALERT to set this function on a channel in Manual mode.
appears on the display. (Except Alpha Name display)
You cannot set this function for the channels which have not programmed before.
17