Uniden BC95XLT manual Searching For and Temporarily Storing Active Frequencies, Service Search

Page 34

2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.

If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mis- take, press then enter the correct frequency. To enter the frequency anyway, press E to accept.

4.To program the next channel in sequence, press Func + E then repeat Steps 2 and 3.

Searching For and Temporarily Storing Active Frequencies

If you do not have a reference to frequencies in your area, use a search (except weather service search) to find a transmission.

Note: When the scanner starts searching, it auto- matically turns on the delay function. To turn delay on or off, press Func + Dly.

Service Search

You can search for weather, ham, marine, aircraft, police, or fire transmissions without knowing the specific frequencies used in your area. The scanner is preprogrammed with all the frequencies allocated to these services. To use this feature, press Func and Svc. SRCH appears and the scanner searches starting with the weather service bank. To select a different service bank, repeatedly press Func and Svc. Service mode appears on the display.

When the scanner stops on a transmission, press Hold to stop searching and listen to the transmission. Hold appears. In this mode, you can

Operation

34

Image 34
Contents BC95XLT Precautions PrecautionsPrecautions BC95XLT Controls and Display BC95XLT Controls and DisplayContents Page Scanning Legally FCC Wants You To KnowFCC Wants You To Know FCC Wants You To Know Introduction IntroductionFrequency Range Step Mode Transmission MHz KHz Feature Highlights Feature HighlightsFeature Highlights About This Manual UnderstandingFeature HighlightsScanning What is Scanning?What is Searching? Understanding ScanningConventional Scanning Simplex OperationRepeater Operation Where To Obtain More InformationInformation On The Internet For more information about Uniden and our other Included With Your Scanner Included With Your ScannerUsing Non-Rechargeable Batteries Setting Up Your ScannerUsing Internal Batteries Setting Up Your ScannerSetting Up Your Scanner Using Rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension SpeakerConnecting to a PC Belt ClipAbout Your Scanner About Your ScannerLook At The Keypad Hold/ CFunc + Pgm Look At The Display About Your Scanner Understanding Banks Service BanksChannel-Storage Banks Storing Known Frequencies Into Channels Turning On The Scanner Setting SquelchOperation OperationService Search Searching For and Temporarily Storing Active FrequenciesStoring Frequencies into Channels During Service Search Scanning the Stored ChannelsManually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features To Step Using Close Call RF Capture Chain SearchChain Search Mode Chain Search Hold ModeProgram Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Locking Out Channels PriorityUsing Keylock Using the Display BacklightTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Care and Maintenance Care and MaintenanceCleaning General UseRepairs BirdiesSpecifications SpecificationsSensitivity 12dB Sinad 21.3 MHz Optional Accessories Optional AccessoriesOne-Year Limited Warranty One-Year Limited WarrantyOne-Year Limited Warranty Page Page World Without Wires