Weather | The squelch | Adjust the squelch |
scan | might need to | threshold. See |
doesn’t | be adjusted. | “Turning On The |
work. |
| Scanner and |
|
| Setting Squelch” on |
|
| Page 33. |
| The antenna | Check the antenna |
| might need to | connection. |
| be adjusted. |
|
Resetting the Scanner
If the scanner's display locks up or stops operating properly, you might need to reset the scanner.
Caution: This procedure clears all the information you have stored in the scanner. Before you reset the scanner, try turning it off and on to see if it begins working properly. Reset the scanner only when you are sure it is not working properly.
1.Turn off the scanner.
2.While holding down 2, 9, and Hold, turn on the scanner. It takes about 3 seconds to initialize and CLEAr appears.
Troubleshooting
53