Uniden BC95XLT manual Troubleshooting

Page 51

Troubleshooting

If your BC95XLT is not performing properly, try the following steps.

Problem	Possible Cause	Suggestion
The	The scanner	Check the batteries
scanner	might not be	or make sure the
doesn’t	receiving any	AC adapter is
work.	power.	connected to an AC
		outlet and the
		scanner.
		If there is a wall
		switch that controls
		power to the AC
		outlet where you
		connected the AC
		adapter, make sure
		it is on.
Improper	The scanner’s	Check the antenna
reception.	antenna might	connection or move
	need to be	or reposition the
	adjusted.	antenna.
		Move the scanner.
		You might be in a
		remote area that
		could require an
		optional multi-band
		antenna. Check
		with your dealer or
		local electronics
		store.
Scan	The squelch	Adjust the squelch
won’t	might need to	threshold. See
stop.	be adjusted.	“Turning On The
		Scanner and
		Setting Squelch” on
		Page 33.
		Troubleshooting

51

Image 51

Contents BC95XLT Precautions PrecautionsPrecautions BC95XLT Controls and Display BC95XLT Controls and DisplayContents Page FCC Wants You To Know Scanning LegallyFCC Wants You To Know FCC Wants You To Know Introduction IntroductionFrequency Range Step Mode Transmission MHz KHz Feature Highlights Feature HighlightsFeature Highlights About This Manual Understanding Scanning What is Scanning?What is Searching? UnderstandingFeature HighlightsScanningSimplex Operation Conventional ScanningWhere To Obtain More Information Repeater OperationInformation On The Internet For more information about Uniden and our other Included With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Non-Rechargeable BatteriesSetting Up Your Scanner Using Rechargeable Batteries Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneBelt Clip Connecting to a PCAbout Your Scanner About Your ScannerHold/ C Look At The KeypadFunc + Pgm Look At The Display About Your Scanner Service Banks Understanding BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchOperation Storing Known Frequencies Into ChannelsSearching For and Temporarily Storing Active Frequencies Service SearchScanning the Stored Channels Storing Frequencies into Channels During Service SearchManually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features To Step Chain Search Using Close Call RF CaptureChain Search Hold Mode Chain Search ModeProgram Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out ChannelsUsing the Display Backlight Using KeylockTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner General Use Care and MaintenanceCleaning Care and MaintenanceBirdies RepairsSpecifications SpecificationsSensitivity 12dB Sinad 21.3 MHz Optional Accessories Optional AccessoriesOne-Year Limited Warranty One-Year Limited WarrantyOne-Year Limited Warranty Page Page World Without Wires