Uniden UBC785XLT manual Feature Highlights

Feature Highlights

•1000 Channels – Program one frequency into each channel. You must have at least one channel programmed to use the Scan mode.

•22 Bands – Includes 22 bands, with aircraft and 800 MHz.

•25 MHz-1300 MHz – Indicates the range of frequencies that can be searched within the bands of your scanner.

Note: The frequency coverage is not continuous and excludes 512-806 MHz and 960-1240 MHz.

•10 Priority Channels – You can assign one priority channel in each bank. Assigning a priority channel allows you to keep track of activity on your most important channel(s) while monitoring other channels for transmissions.

•Priority Plus Scan – Allows you to scan only priority channels.

•Air Band Service – Allows you to search the aircraft frequencies at the press of a button, and to choice the step from 12.5 kHz or 8.33 kHz.

•Unique Data Skip – Allows your scanner to skip unwanted data transmissions and reduces birdies.

•Memory Backup – If power is disconnected, the frequencies programmed in your scanner are retained in memory.

•Direct Channel Access – Go directly to any channel without entering the Menu mode.

•Attenuator – Reduces the signal strength on a per frequency basis.

•Turbo Search – Increases the search speed to 300 steps per second. This applies only to transmission bands with 5 kHz steps.

•Text Tags – You can customize your scanner by storing text tags (up to 16 characters).

•Auto Store – The scanner automatically stores found active frequencies into an assigned bank.

•CTCSS/DCS – The scanner can receive and search for subaudible tones.

10