Uniden UBC785XLT manual Typical Mounting Methods, Mounting the Scanner in Your Vehicle

Page 18

Typical Mounting Methods

The UBC785XLT can be conveniently mounted on a table, bulkhead, overhead, or any other desired location (refer to figure below for typical mounting methods).

Caution: Make sure there are no hidden electrical wires or other items behind the desired location before proceeding. Check that free access for mounting and cabling

is available.

• Table top mount

• Bulkhead mount

• Overhead mount

Mounting the Scanner in Your Vehicle

Before you mount the scanner, make sure you have all the necessary materials. Then confirm that the scanner fits your vehicle’s mounting area. This unit requires a mounting area of 2-3/8 inch high by 6-15/16 inch wide by 6-9/16 inch deep (61 x 176.5 x 167 mm).

Caution: Be sure to avoid obstructions behind the mounting surface.

Follow these steps to mount the scanner in your vehicle.

1.Choose a mounting location, then use the supplied mounting bracket as a template to mark the positions for

the mounting screw holes.

2. In the marked positions, drill holes slightly smaller than the supplied screws.

3. Attach the mounting bracket to the mounting location using the supplied screws and lock washers.

4. Attach the scanner to the mounting bracket using the supplied mounting knobs.

5. Connect the antenna’s cable to the ANT. connector on the back of the scanner.

Note: If the antenna cable’s connector does not fit in the ANT. connector, you might also need a Motorola-to BNC antenna plug adapter (available at a local electronics store).

14

Page 17 Page 19
Image 18
Page 17 Page 19
Contents A N N E R Page Contents Page Introduction 15kHz Offset WFM Front and Rear View VFO/SELECT PushIcon Description UBC785XLT Shortcuts Press Menu Important Notice What is Scanning? What is Searching?Terminology Feature Highlights Where to Obtain More Information Information on the InternetIncluded with Your Scanner Package Mounting an Antenna SetupConnecting an Antenna Optional AntennaTypical Mounting Methods Mounting the Scanner in Your VehicleApplying Power for Vehicle Installation Connecting an External Speaker Desktop InstallationApplying Power Using Standard AC Power Connecting an EarphoneListening Safely Connecting the Clone CableConnecting the Tape Recorder RememberSetting the Squelch Basic OperationTurn the Scanner On Understanding the Menu System Menu Description and Numeric Keypad Equivalents 2SEARCH Range6RECORD Allows you to change the brightness of the display 9BANK TAG 001 Storing Frequencies into Channels in Menu ModeProgramming 001 855.0000 FM010 512.0000 FM C10000000.0000 001 855.0000 NFM Alpha TAG Transfer FrequenciesStoring Alpha Tags Beep Alert Programming TipsAssigning the Beep Alert to a Channel Scanning Scan Hold FeatureTo directly access a specific channel BankRF Attenuation Feature Setting the Delay Mode for FrequencyLockout in Hold Mode 001 141.5000 FM Uniden Group aChannel Lockout Lockout in Scanning Mode Restoring a Locked-out ChannelRestoring All Locked-out Channels Priority Scan 010 1240.0000 FM005 512.0000 FM Changing the Priority ChannelSetting a Search Range SearchingSrch 12.5k Starting Chain Search Search Hold FeatureSrch 12.5k 1240.0000 FM Range 25cm Amateur Grp Data SkipSrch 12.5k 1240.0000 NFM Range C004 Frequency SkipStoring Search Frequencies 001 FM Bank Squelch SQ Mode12--56 Auto StoringFor Search mode, select 1SERVICE Option / Chain Search 003 FM DCS Uniden Group a 003001 FM DCS Bank 001 512.0000 FM BankAir Service Search Skip Air Service SearchUsing Aircraft Service Search Changing the stepTo connect Scanner to PC PC Control ModeRemote Interface To program your scannerSpeed 39600 bps 419200 bps Clone ModeStart Remote Mode and Change Transfer Speed PC Control ParameterTo connect the Scanner to Scanner Clone Master Unit Slave Unit Enter Lock Additional FeaturesDimmer Key Beep OptionFrequency and Channel Tuning with the VFO Control Reverse ModeReceiving Mode Selection Channel Step SelectionCare and Maintenance Troubleshooting Resetting the ScannerSpecifications Glossary of Terms Page Ctcss Frequency List Hz DCS Tone CodeUBC785XLT Flow Charts Scan Option System Option Dimmer 1HIGH / 2MEDIUM / 3OFF Screen Mask Declaration of Conformity Uniden Corporation All rights reserved UBZZ01343ZZ0
Related manuals
Manual 60 pages 53.46 Kb

UBC785XLT specifications

The Uniden UBC785XLT is a versatile and powerful handheld scanner designed for both amateur radio enthusiasts and professional users. Renowned for its broad frequency coverage, this scanner offers a comprehensive solution for monitoring a wide array of communications. Combining advanced features with exceptional ease of use, the UBC785XLT is an essential tool for anyone interested in scanning radio frequencies.

One of the key features of the UBC785XLT is its extensive frequency range, which spans from 25 MHz to 1.3 GHz. This allows users to listen in on various signals, including VHF and UHF bands, making it suitable for public service channels, aircraft communications, and even amateur radio operations. It also supports a variety of modes, including FM, AM, and digital modes, allowing users to access a wide array of broadcasts.

The scanner’s memory capacity is another notable characteristic. It comes with 1,000 channels grouped into 50 banks, allowing you to organize your frequencies efficiently. Users can easily program and store their favorite channels, and the scanner features a built-in memory backup to preserve settings and frequencies even when powered off.

Incorporating advanced scanning technologies, the UBC785XLT features a triple conversion superheterodyne design, which enhances its frequency stability and adds to the overall sensitivity. The scanner also comes equipped with Close Call RF Capture technology, which enables it to automatically find and monitor nearby signals in real-time, making it easier for users to discover new frequencies.

For those who prefer customized settings, the UBC785XLT offers a range of programmable features, including priority scanning, which allows users to designate specific channels to be monitored more frequently. The scanner’s versatile scanning modes, such as Dynamic Memory Allocation, make it easy to tailor the experience based on individual needs, ensuring that important communications are never missed.

The UBC785XLT is designed with user accessibility in mind. It features a large, backlit LCD display for easy readability in various lighting conditions. The user interface is intuitive, making navigation through channels and settings straightforward.

In summary, the Uniden UBC785XLT is a comprehensive scanning solution that appeals to a wide range of users. With its extensive frequency coverage, advanced scanning technologies, and user-friendly interface, it stands out as a top choice for anyone looking to explore the world of radio communications. Whether for emergency services monitoring or personal interest in radio messages, the UBC785XLT delivers reliable performance and versatility.
Top Page Image Contents