Uniden UBC785XLT Srch 12.5k 1240.0000 NFM Range C004, Frequency Skip, Storing Search Frequencies

Page 39

Also instead of pressing E, you can press the VFO control.

When Data Skip is active, your scanner may pause momentarily on an unwanted signal but will resume searching in 2 or 3 seconds. The Data Skip feature is active as well as Scan mode. Data Skip does not function during AM/WFM band Scan, Chain Search for AM/WFM band or Priority Scan.

Frequency Skip

If a particular frequency continues to interrupt search scanning, it is possible to set your scanner to skip the frequency.

To skip over a frequency, press L/O when stopping at the frequency you want to skip or when in Search Hold mode.

Note: • You can program up to 200 skip frequencies.

When the 201st skip frequency is programmed, the first frequency is automatically unlocked.

•If all frequencies in the search range are set to skip, a beep sounds and it moves to Search Hold mode.

To resume searching.

1)Cancel the Frequency Skip by pressing L/O at the frequencies you want to resume searching.

–––OR –––

2)Change the Search Frequency range.

To cancel all skipped frequencies, press and hold L/O for 2 seconds in Search Hold mode.

Storing Search Frequencies

You can quickly store any frequency you find during Search.

1.Press ▲/HOLD or LIMIT/▼ to stop searching, or when the scanner stops on the frequency you want to store, press TRNFR.

2.The smallest empty channel number flashes on the display. If you want to store the frequency to other channel, select the channel by rotating the VFO or using ▲ or ▼.

3.Press E.

SRCH 12.5k

1240.0000 NFM

Range 1

C004 0000.0000

Note: • If the frequency you want to store exists already,

WARNING appears on the display and you will hear a beep. (See “Duplicate Frequency Alert” on page 25.)

•After storing the frequency, the scanner moves to the Search Hold mode.

•If no free channel exists, the frequency you want to store will automatically be stored in the previous channel before you entered into Chain Search mode.

4.If you want to store other frequencies, resume search by pressing SRCH or RSM, then repeat the step 1 to 3.

35

Page 38 Page 40
Image 39
Page 38 Page 40
Contents A N N E R Page Contents Page Introduction 15kHz Offset WFM VFO/SELECT Push Front and Rear ViewIcon Description UBC785XLT Shortcuts Press Menu Important Notice What is Scanning? What is Searching?Terminology Feature Highlights Information on the Internet Where to Obtain More InformationIncluded with Your Scanner Package Optional Antenna SetupConnecting an Antenna Mounting an AntennaMounting the Scanner in Your Vehicle Typical Mounting MethodsApplying Power for Vehicle Installation Connecting an Earphone Desktop InstallationApplying Power Using Standard AC Power Connecting an External SpeakerRemember Connecting the Clone CableConnecting the Tape Recorder Listening SafelySetting the Squelch Basic OperationTurn the Scanner On Understanding the Menu System 2SEARCH Range Menu Description and Numeric Keypad Equivalents6RECORD Allows you to change the brightness of the display 9BANK TAG 001 855.0000 FM Storing Frequencies into Channels in Menu ModeProgramming 001010 512.0000 FM C10000000.0000 001 855.0000 NFM Alpha TAG Transfer FrequenciesStoring Alpha Tags Beep Alert Programming TipsAssigning the Beep Alert to a Channel Bank Scan Hold FeatureTo directly access a specific channel ScanningSetting the Delay Mode for Frequency RF Attenuation FeatureLockout in Hold Mode 001 141.5000 FM Uniden Group aChannel Lockout Lockout in Scanning Mode Restoring a Locked-out ChannelRestoring All Locked-out Channels Changing the Priority Channel 010 1240.0000 FM005 512.0000 FM Priority ScanSetting a Search Range SearchingSrch 12.5k Data Skip Search Hold FeatureSrch 12.5k 1240.0000 FM Range 25cm Amateur Grp Starting Chain SearchSrch 12.5k 1240.0000 NFM Range C004 Frequency SkipStoring Search Frequencies Auto Storing Squelch SQ Mode12--56 001 FM BankFor Search mode, select 1SERVICE Option / Chain Search 001 512.0000 FM Bank 003001 FM DCS Bank 003 FM DCS Uniden Group aChanging the step Air Service SearchUsing Aircraft Service Search Air Service Search SkipTo program your scanner PC Control ModeRemote Interface To connect Scanner to PCPC Control Parameter Clone ModeStart Remote Mode and Change Transfer Speed Speed 39600 bps 419200 bpsTo connect the Scanner to Scanner Clone Master Unit Slave Unit Key Beep Option Additional FeaturesDimmer Enter LockChannel Step Selection Reverse ModeReceiving Mode Selection Frequency and Channel Tuning with the VFO ControlCare and Maintenance Resetting the Scanner TroubleshootingSpecifications Glossary of Terms Page DCS Tone Code Ctcss Frequency List HzUBC785XLT Flow Charts Scan Option System Option Dimmer 1HIGH / 2MEDIUM / 3OFF Screen Mask Declaration of Conformity Uniden Corporation All rights reserved UBZZ01343ZZ0
Related manuals
Manual 60 pages 53.46 Kb

UBC785XLT specifications

The Uniden UBC785XLT is a versatile and powerful handheld scanner designed for both amateur radio enthusiasts and professional users. Renowned for its broad frequency coverage, this scanner offers a comprehensive solution for monitoring a wide array of communications. Combining advanced features with exceptional ease of use, the UBC785XLT is an essential tool for anyone interested in scanning radio frequencies.

One of the key features of the UBC785XLT is its extensive frequency range, which spans from 25 MHz to 1.3 GHz. This allows users to listen in on various signals, including VHF and UHF bands, making it suitable for public service channels, aircraft communications, and even amateur radio operations. It also supports a variety of modes, including FM, AM, and digital modes, allowing users to access a wide array of broadcasts.

The scanner’s memory capacity is another notable characteristic. It comes with 1,000 channels grouped into 50 banks, allowing you to organize your frequencies efficiently. Users can easily program and store their favorite channels, and the scanner features a built-in memory backup to preserve settings and frequencies even when powered off.

Incorporating advanced scanning technologies, the UBC785XLT features a triple conversion superheterodyne design, which enhances its frequency stability and adds to the overall sensitivity. The scanner also comes equipped with Close Call RF Capture technology, which enables it to automatically find and monitor nearby signals in real-time, making it easier for users to discover new frequencies.

For those who prefer customized settings, the UBC785XLT offers a range of programmable features, including priority scanning, which allows users to designate specific channels to be monitored more frequently. The scanner’s versatile scanning modes, such as Dynamic Memory Allocation, make it easy to tailor the experience based on individual needs, ensuring that important communications are never missed.

The UBC785XLT is designed with user accessibility in mind. It features a large, backlit LCD display for easy readability in various lighting conditions. The user interface is intuitive, making navigation through channels and settings straightforward.

In summary, the Uniden UBC785XLT is a comprehensive scanning solution that appeals to a wide range of users. With its extensive frequency coverage, advanced scanning technologies, and user-friendly interface, it stands out as a top choice for anyone looking to explore the world of radio communications. Whether for emergency services monitoring or personal interest in radio messages, the UBC785XLT delivers reliable performance and versatility.
Top Page Image Contents