Vanguard Managed Solutions 342 Setting the Interface Type, Parameter, Configure Port

Page 63

Configuring the Serial Interface

Setting the Interface Type

Introduction

This section provides instructions for setting the Interface Type parameter.

Interface Type Use this procedure to set the Interface Type parameter:

Parameter

	Step	Action	Result/Description

	1	From the Control Terminal	The Port record appears.
		Port Main menu, select
		Configure -> Port.

	2	In the Port Number parameter,	Port 3 is selected.
		type 3, then press ENTER.

	3	In the Port Type parameter,	This defines Port 3 type as FRI.
		type FRI, then press ENTER

	4	In the Interfaced Type, type a	The Range and Default appear:
		?, and then press ENTER.	Range = V.24, V.35, V.36, X.21, NONE
			Default = V.24
			Specify the Electrical Interface Type:
			V.24 - V.24 Electrical Interface Type
			V.35 - V.35 Electrical Interface Type
			V.36 - V.36 Electrical Interface Type
			X.21 - V.11 Electrical Interface
			Type
			NONE - Electrically disabled

	5	Select an Interface Type from	The Interface Type is set.
		the menu and press ENTER.

Installation and Replacement

3-9

Image 63

Contents Vanguard Managed Solutions Restricted Rights Legend Restricted Rights Notification for U.S. Government UsersProprietary Material Radio Frequency Interference RegulationsTelecommunications Regulations Page Contents Contents About This Manual OverviewThis Chapter Description Documentation Kit Includes About This Manual Related DocumentationOther DocumentationAbout This Manual Page Special Notices and Translations Simplified Chinese Danish SærligeOverskrifter French Messages Dutch BijzondereVermeldingen Finnish ErityisilmoituksetSimboli speciali German BesondereHinweise ItalianMerknader Japanese Korean Norwegian SpesielleSwedish Speciella Portuguese PortugalSpanish/Spain Notificaciones EspecialesVarning Comments About Customer InformationCustomer QuestionsPage Customer Response Card Page Chapter Vanguard 342 Description DescriptionLimitations Features and Functionality Functionality DaughtercardTarget Applications What is a VPN? Advantages of a Virtual Private NetworkRequirements of a Hardware Options Hardware-based VPN Solution for Site-to-Site ApplicationsIPSec Standard-based Tunneling and Encryption for IP TrafficEncryption over IP, Frame Relay, and X.25 Networks Security FeaturesIP and Serial Protocols over Frame Relay IP and Serial Protocols over Frame RelayVideo and Serial Protocols over Public or Private Networks Video and Serial Protocols over Public or Private NetworksSpeeds DSU DIM, FXS/FXO Application Daughtercard Application Description Type UsedSmall Home and Branch Office to Central Office Application Soho and Branch Office to Central Office over IsdnOffice Type Daughtercard Used Description 342 DSL/Cable ModemShdsl Daughtercard LAN Over WAN G.SHDSL Daughtercard InstalledLAN Segmentation LAN Segmentation10. Vlan Virtual LAN VlanVanguard 342 DCE INT -- VG6560 SDB2 EXT Clocking Limitations VanguardLimitation Vanguard 342 DCE INT -- VG6560/VG320/VG64xx EXT at 1.5 MbpsHardware Description Overview ChapterIntroduction Vanguard 342 Enclosure Front Panel EnclosureVanguard 342 Rear Panel Rear PanelGeneral MotherboardAccess MotherboardDaughtercards Vanguard 340 Compatible Flash Simm Devices are as follows Vanguard 342 Compatible Flash Simm Devices are as followsVanguard Daughtercards DIMCompatibility Port FXS/FXO Voice Daughtercard Connector FXO Daughtercard Dual E&M 10. Dual E&M Daughtercard ConnectorIsdn Enhanced Isdn BRI-S/T Data Isdn BRI Voice 12. Isdn and Enhanced Isdn BRI-S/T Daughtercard Connector14. DSU Daughtercard Connector Modem 16. V.90 Daughtercard ConnectorsPage Installation and Replacement Checking Your Shipment Contents Installing The Vanguard Selecting and Preparing the Installation Site Proper Cable and Air Clearance Installing Your Vanguard InstallationStep Action Fan Inlet TemperaturePower Supply Thermal ConsiderationsConfiguring the Serial Interface Interface TypeInterface Option Step Action Result/Description Setting the Interface TypeConfigure Port ParameterSetting the Interface Options PortEnter Types Panel Cabling the VanguardApplication Specific Port Characteristics and CablingCharacteristics Cable Requirements Port Connector Interface Cable Required SpeedDCE DTEConnectors Configure portCable Information RJ45 Pinout RJ45 Pin Signal Pin Connection On DB25F Adapter10/100BaseT Adapter Cable Pin SignalAdapter Cable Function/Signal Port DTE Signal using Pin NameTest Mode External Transmit Clock Make Busy Port3CLOCK-B External External Transmit CLOCK-A DB25 V.35/V.36 PinoutsTIMING-B External Transmit Clock B Clock a Port DCE Signal Function/Signal DTE Signal Pin Name UsingCONTROL-B Signal Element TIMING-A Received DATA-BCrossover Cable Connections Connections modeModifying Your Vanguard Vanguard Installing Vanguard DaughtercardsAccessing Accessing the MotherboardVanguard 342 Motherboard Removal and Replacement Step Procedure forInstalling Motherboard Removing MotherboardAdding and Removing Memory Modules Sdram DimmFlash Simm Adding/Removing Data Compression Encryption Simm Adding/RemovingSimm and Dimm Installation/Replacement Location of Motherboard Components Sdram Dimm Flash Simm Simm and Dimm SlotsInstalling/Removing the Lithium Battery Removing Installing BatteryPage Powering Up and Loading Software Overview Powering Up Your Vanguard Powering OnResetting Approved Practice for Powering Down a Vanguard Unit Powering Off The VanguardPowering Off The Vanguard Powerup Diagnostics Detailed FrontPanel LEDs Green Power UpWhen This indicates SequenceAccessing the Control Terminal Port Enter Using RemoteUsing SoTCP TelnetObtaining and Installing Operating Software Where to GetOperating Software Filename Description File FormatsSpecifications HardwareSoftware Specifications Software License and Regulatory Information Overview Appendix BRJ48C How to Order ConnectionsRJ48S RJ49CCustomer-Provided TelephoneEquipment CE Marking Product Declarations and Regulatory InformationVerklaring van overeenstemming Declarations ConformityItalian Dichiarazione di conformità Product Declarations and Regulatory Information Page Limited Warranty Page For Locations Contact Return Procedures IntroductionFactory Repair Index NumericsCTP Simm Index-3