Wasp Bar Code WPA1200 manual Charging the Battery, LED Status, Meaning

Page 10

WPA1200 Product Reference Guide

Charging the Battery

Before using the WPA1200 for the first time, you need to charge it for about 16 hours. After that, you can charge the WPA1200 daily for 4 hours to recharge the battery to full capacity. Charge the WPA1200 using the USB charging cable.

Caution: Operating the WPA1200 for the first time without the AC adapter, and without fully charging the backup battery may result in loss of data stored in RAM memory. When the main battery is removed, the backup battery retains RAM data in memory for 2 hours, please charge the battery to avoid the data loss in RAM memory.

Note: Data you entered may not be properly stored until the built-in backup battery has been adequately charged.

Charging the Battery using the USB Cable

1.Press and hold the connector button on the USB charging cable and connect it to the WPA1200 (1).

2.Plug the AC adapter cable into the power jack on the USB charging cable (2).

3.Connect the AC adapter into an electrical outlet (3).

LED Status

		LED	Meaning
	WPA1200	Solid Red	Charging
	WPA1200	Solid Green	Charging Complete
		Solid Green	Charging Complete

7

Image 10

Contents WPA1200 Wasp Barcode TechnologiesLaser Information Table of Contents Getting Started FeaturesIntroducing the WPA1200 Package Contents Tour of the WPA1200 Front Left View Component DescriptionBack View Component Description Backup Battery Switch Installing the BatteryGetting Started Contacts Plastic Tab Securing ClipMeaning Charging the BatteryLED Status WPA1200Connecting the WPA1200 to a PC Checking the Battery StatusTurning On the WPA1200 For the First Time Calibrating the WPA1200 Screen CE .NetCE .Net Windows Mobile Keypads and Key Functions Using the HardwareKey Main Function Secondary Function WPA1200 Product Reference Guide Using the SD/MMC Memory Card Adjusting the Screen BrightnessUsing the Stylus Decrease Brightness Function Button Increase BrightnessUsing the Laser Scanner Removing a Storage CardScanner Control Panel opens CE .Net Getting Connected Installing Microsoft ActiveSyncTo install Microsoft ActiveSync on your computer Establishing Device-PC ConnectionWPA1200 Product Reference Guide WPA1200 Product Reference Guide Connecting the Device to Your Computer Connection Options Synchronization with your ComputerUSB Connection Infrared Connection Click File → Connection SettingsTap Menu → Connections Perform the steps below on your CE .Net 5 device Perform the steps below on your Windows Mobile 5 deviceBluetooth Connection Tap Scan DeviceWPA1200 Product Reference Guide Select a device from the list and tap Next WPA1200 Product Reference Guide Select the Wireless Informatiom Tag WiFi ConnectionFor CE .Net 5 Devices All available Only access points Only computer-to-computer Synchronizing InformationSynchronization Options Using ActiveSync to Exchange FilesTo copy files WPA1200 Product Reference Guide Barcode Scanner Programs Scanner SettingScan2Key Barcode Symbologies Defaults Verification Char/DigitAdvanced Settings Checking the Main and Backup Battery Status Open Power PropertiesExtending Battery Life Changing the Automatic Power SettingsAdjusting Backlight Setting CE .Net Windows Mobile Reset Performing a Cold Boot on a CE .Net 5 Device Performing a hardware resetPerforming a Warm Boot Viewing Flash Memory FilesTap Start → Programs → Utilities → Boot Mode Performing a Cold Boot on a Windows Mobile 5 DeviceMethod Appendix CPU