Wasp Bar Code WPA1200 manual Getting Started, Installing the Battery, Backup Battery Switch

Page 8

WPA1200 Product Reference Guide

Getting Started

This section explains how to install and charge the battery, how to check battery status, how to turn on the WPA1200, and how to calibrate the screen.

Installing the Battery

Warning: There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dispose of the battery pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of used batteries according to local recycling guidelines in your area.

A backup battery cell is embedded into your device to prevent data loss in instances when the removable battery pack is removed or completely discharged. This backup battery cell will only support the system for a maximum of 2 hours.

Note: To enable the internal battery cell to provide backup power supply, charge your device with the main battery pack for at least 16 hours.

1. Open the battery compartment by pushing the latch in the direction of the arrow and lift up.

The battery compartment is displayed below:

Compartment Contacts

Plastic Battery Tabs

Battery Securing Clip

Note: The plastic battery tab makes it easy to remove the battery.

2. Locate the backup battery switch and turn it on.

Backup Battery Switch

5

Image 8
Contents WPA1200 Wasp Barcode TechnologiesLaser Information Table of Contents Introducing the WPA1200 FeaturesGetting Started Package Contents Tour of the WPA1200 Front Left View Component DescriptionBack View Component Description Getting Started Installing the BatteryBackup Battery Switch Contacts Plastic Tab Securing ClipCharging the Battery LED StatusMeaning WPA1200Turning On the WPA1200 For the First Time Checking the Battery StatusConnecting the WPA1200 to a PC Calibrating the WPA1200 Screen CE .NetCE .Net Windows Mobile Key Main Function Secondary Function Using the HardwareKeypads and Key Functions WPA1200 Product Reference Guide Adjusting the Screen Brightness Using the StylusUsing the SD/MMC Memory Card Decrease Brightness Function Button Increase BrightnessUsing the Laser Scanner Removing a Storage CardScanner Control Panel opens CE .Net Installing Microsoft ActiveSync To install Microsoft ActiveSync on your computerGetting Connected Establishing Device-PC ConnectionWPA1200 Product Reference Guide WPA1200 Product Reference Guide Connecting the Device to Your Computer USB Connection Synchronization with your ComputerConnection Options Tap Menu → Connections Click File → Connection SettingsInfrared Connection Perform the steps below on your CE .Net 5 device Perform the steps below on your Windows Mobile 5 deviceBluetooth Connection Tap Scan DeviceWPA1200 Product Reference Guide Select a device from the list and tap Next WPA1200 Product Reference Guide For CE .Net 5 Devices WiFi ConnectionSelect the Wireless Informatiom Tag All available Only access points Only computer-to-computer Synchronizing InformationTo copy files Using ActiveSync to Exchange FilesSynchronization Options WPA1200 Product Reference Guide Scan2Key Scanner SettingBarcode Scanner Programs Barcode Symbologies Defaults Verification Char/DigitAdvanced Settings Checking the Main and Backup Battery Status Open Power PropertiesExtending Battery Life Changing the Automatic Power SettingsAdjusting Backlight Setting CE .Net Windows Mobile Performing a hardware reset Performing a Warm BootReset Performing a Cold Boot on a CE .Net 5 Device Viewing Flash Memory FilesTap Start → Programs → Utilities → Boot Mode Performing a Cold Boot on a Windows Mobile 5 DeviceMethod Appendix CPU