Wasp Bar Code WPA1200 manual Using the Laser Scanner, Removing a Storage Card

Page 17

WPA1200 Product Reference Guide

3.Push the card into the slot until you hear an audible system sound; this will signal that the card is already properly seated within the slot.

The card is secured when it is not protruding from the slot.

Removing a Storage Card

1.Remove the two screws from the SD compartment cover and remove the cover.

2.Press the card in and release.

3.The card pops out. An audible system sound will signal that the card has been released.

4.Remove the card from the slot.

Using the Laser Scanner

The WPA1200 has an integrated laser scanner that reads all major bar code labels.

Note: Scanning software must be enabled in order to operate the scanner. This can be a user-loaded application or a pre-loaded utility such as Scanner Setting.

Activate the laser scanner by pressing either one of the trigger keys located on the left and right side of the unit. The WPA1200 has a built-in Scanner Setting utility that allows you to test the device’s barcode scan function.

1.To launch Scanner Settings, tap Start → Settings → System → Scanner Settings.

CE .Net 5

Windows Mobile 5

14

Image 17

Contents Wasp Barcode Technologies WPA1200Laser Information Table of Contents Introducing the WPA1200 FeaturesGetting Started Package Contents Front Left View Component Description Tour of the WPA1200Back View Component Description Getting Started Installing the BatteryBackup Battery Switch Securing Clip Contacts Plastic TabLED Status Charging the BatteryMeaning WPA1200Turning On the WPA1200 For the First Time Checking the Battery StatusConnecting the WPA1200 to a PC CE .Net Calibrating the WPA1200 ScreenCE .Net Windows Mobile Key Main Function Secondary Function Using the HardwareKeypads and Key Functions WPA1200 Product Reference Guide Using the Stylus Adjusting the Screen BrightnessUsing the SD/MMC Memory Card Decrease Brightness Function Button Increase BrightnessRemoving a Storage Card Using the Laser ScannerScanner Control Panel opens CE .Net To install Microsoft ActiveSync on your computer Installing Microsoft ActiveSyncGetting Connected Establishing Device-PC ConnectionWPA1200 Product Reference Guide WPA1200 Product Reference Guide Connecting the Device to Your Computer USB Connection Synchronization with your ComputerConnection Options Tap Menu → Connections Click File → Connection SettingsInfrared Connection Perform the steps below on your Windows Mobile 5 device Perform the steps below on your CE .Net 5 deviceTap Scan Device Bluetooth ConnectionWPA1200 Product Reference Guide Select a device from the list and tap Next WPA1200 Product Reference Guide For CE .Net 5 Devices WiFi ConnectionSelect the Wireless Informatiom Tag Synchronizing Information All available Only access points Only computer-to-computerTo copy files Using ActiveSync to Exchange FilesSynchronization Options WPA1200 Product Reference Guide Scan2Key Scanner SettingBarcode Scanner Programs Verification Char/Digit Barcode Symbologies DefaultsAdvanced Settings Open Power Properties Checking the Main and Backup Battery StatusChanging the Automatic Power Settings Extending Battery LifeAdjusting Backlight Setting CE .Net Windows Mobile Performing a Warm Boot Performing a hardware resetReset Performing a Cold Boot on a CE .Net 5 Device Viewing Flash Memory FilesPerforming a Cold Boot on a Windows Mobile 5 Device Tap Start → Programs → Utilities → Boot ModeMethod CPU Appendix