Wasp Bar Code WPA1200 manual Checking the Main and Backup Battery Status, Open Power Properties

Page 37

WPA1200 Product Reference Guide

Checking the Main and Backup Battery Status

This section describes how to view the power level for both the main and backup battery. To minimize power consumption, you can define settings for the auto-off function and the processor’s operation speed.

To check the main and backup battery status:

1.Open Power Properties.

If the Plug or Battery icon appears on your device, double-tap the icon to bring the Power Properties screen.

On CE .Net 5 Devices: Tap Start → Settings → Control Panel → Power.

On Windows Mobile 5 Devices: Tap Start → Settings → System → Power.

Plug Icon

CE .Net 5

Windows Mobile 5

Note: Press Fn key and “8” button

2.The battery menu item displays the status of the main and backup batteries. On the screen shown here, both batteries are Good on the CE .Net 5 example and almost 100% on the Windows Mobile 5 example.

Note: It is necessary to charge the battery when the battery charge is Low or Very Low (below 10%). If the battery does not accept a charge, contact Technical Support.

CE .Net 5	Windows Mobile 5

34

Image 37

Contents Wasp Barcode Technologies WPA1200Laser Information Table of Contents Getting Started FeaturesIntroducing the WPA1200 Package Contents Front Left View Component Description Tour of the WPA1200Back View Component Description Backup Battery Switch Installing the BatteryGetting Started Securing Clip Contacts Plastic TabLED Status Charging the BatteryMeaning WPA1200Connecting the WPA1200 to a PC Checking the Battery StatusTurning On the WPA1200 For the First Time CE .Net Calibrating the WPA1200 ScreenCE .Net Windows Mobile Keypads and Key Functions Using the HardwareKey Main Function Secondary Function WPA1200 Product Reference Guide Using the Stylus Adjusting the Screen BrightnessUsing the SD/MMC Memory Card Decrease Brightness Function Button Increase BrightnessRemoving a Storage Card Using the Laser ScannerScanner Control Panel opens CE .Net To install Microsoft ActiveSync on your computer Installing Microsoft ActiveSyncGetting Connected Establishing Device-PC ConnectionWPA1200 Product Reference Guide WPA1200 Product Reference Guide Connecting the Device to Your Computer Connection Options Synchronization with your ComputerUSB Connection Infrared Connection Click File → Connection SettingsTap Menu → Connections Perform the steps below on your Windows Mobile 5 device Perform the steps below on your CE .Net 5 deviceTap Scan Device Bluetooth ConnectionWPA1200 Product Reference Guide Select a device from the list and tap Next WPA1200 Product Reference Guide Select the Wireless Informatiom Tag WiFi ConnectionFor CE .Net 5 Devices Synchronizing Information All available Only access points Only computer-to-computerSynchronization Options Using ActiveSync to Exchange FilesTo copy files WPA1200 Product Reference Guide Barcode Scanner Programs Scanner SettingScan2Key Verification Char/Digit Barcode Symbologies DefaultsAdvanced Settings Open Power Properties Checking the Main and Backup Battery StatusChanging the Automatic Power Settings Extending Battery LifeAdjusting Backlight Setting CE .Net Windows Mobile Performing a Warm Boot Performing a hardware resetReset Performing a Cold Boot on a CE .Net 5 Device Viewing Flash Memory FilesPerforming a Cold Boot on a Windows Mobile 5 Device Tap Start → Programs → Utilities → Boot ModeMethod CPU Appendix