Wasp Bar Code WPA1200 manual Adjusting the Screen Brightness, Using the Stylus

Page 16

WPA1200 Product Reference Guide

Adjusting the Screen Brightness

Adjust the screen brightness by pressing the Function button to enable the soft keys and pressing the 7 (decrease brightness) or 9 (increase brightness) buttons.

Decrease Brightness

 

Function Button

 

Increase Brightness

Using the Stylus

CAUTION: Never use anything other than the WPA1200 stylus on the screen as it could cause permanent damage.

1.Remove the stylus from its holder. Hold the stylus as you would a pencil.

2.To make a choice from a menu, lightly tap the tip of the stylus on that choice.

3.To write data into a field on a form, use the stylus to print the letters or numbers. Use very light pressure.

Using the SD/MMC Memory Card

Your device has an expansion slot compatible with a range of SD and MMC storage cards, which are primarily used to back up or transfer files and data. The slot also supports SDIO cards for added connectivity options.

Inserting a Storage Card

1. Remove the two screws from the SD compartment cover and remove the cover.

2. Insert the SD card with the notched corner as shown by the icon on the case.

13

Image 16
Contents WPA1200 Wasp Barcode TechnologiesLaser Information Table of Contents Getting Started FeaturesIntroducing the WPA1200 Package Contents Tour of the WPA1200 Front Left View Component DescriptionBack View Component Description Backup Battery Switch Installing the BatteryGetting Started Contacts Plastic Tab Securing ClipCharging the Battery LED StatusMeaning WPA1200Connecting the WPA1200 to a PC Checking the Battery StatusTurning On the WPA1200 For the First Time Calibrating the WPA1200 Screen CE .NetCE .Net Windows Mobile Keypads and Key Functions Using the HardwareKey Main Function Secondary Function WPA1200 Product Reference Guide Adjusting the Screen Brightness Using the StylusUsing the SD/MMC Memory Card Decrease Brightness Function Button Increase BrightnessUsing the Laser Scanner Removing a Storage CardScanner Control Panel opens CE .Net Installing Microsoft ActiveSync To install Microsoft ActiveSync on your computerGetting Connected Establishing Device-PC ConnectionWPA1200 Product Reference Guide WPA1200 Product Reference Guide Connecting the Device to Your Computer Connection Options Synchronization with your ComputerUSB Connection Infrared Connection Click File → Connection SettingsTap Menu → Connections Perform the steps below on your CE .Net 5 device Perform the steps below on your Windows Mobile 5 deviceBluetooth Connection Tap Scan DeviceWPA1200 Product Reference Guide Select a device from the list and tap Next WPA1200 Product Reference Guide Select the Wireless Informatiom Tag WiFi ConnectionFor CE .Net 5 Devices All available Only access points Only computer-to-computer Synchronizing InformationSynchronization Options Using ActiveSync to Exchange FilesTo copy files WPA1200 Product Reference Guide Barcode Scanner Programs Scanner SettingScan2Key Barcode Symbologies Defaults Verification Char/DigitAdvanced Settings Checking the Main and Backup Battery Status Open Power PropertiesExtending Battery Life Changing the Automatic Power SettingsAdjusting Backlight Setting CE .Net Windows Mobile Performing a hardware reset Performing a Warm BootReset Performing a Cold Boot on a CE .Net 5 Device Viewing Flash Memory FilesTap Start → Programs → Utilities → Boot Mode Performing a Cold Boot on a Windows Mobile 5 DeviceMethod Appendix CPU