Vivotek PZ6122 Network Settings, General, Get IP address automatically & Use fixed IP address

Page 39

Network Settings

Any changes made on this page will need to restart the system in order to validate the

changes. Make sure every field is entered correctly before clicking on .

"Get IP address automatically" & “Use fixed IP address”

The default status is “Get IP address automatically”. This can be tedious having to perform software installation whenever the Network Camera starts. Therefore, once the network settings, especially the IP address, have been entered correctly, select “Use fixed IP address” then the Network Camera will skip installation at the next boot. The Network Camera can automatically restart and operate normally after a power outage. Users can run IP installer to check the IP address assigned to the Network Camera if the IP address is forgotten or using the UPnP function provided by the Network Camera (MS Windows XP provides UPnP function at My Network Place). As for how to get IP address automatically, please refer to the section of Software Installation.

General

“IP address” This is necessary for network identification.

“Subnet mask” It is used to determine if the destination is in the same subnet. The default value is “255.255.255.0”.

“Default router” This is the gateway used to forward frames to destinations in different subnet. Invalid router setting will fail the transmission to destinations in different subnet.

“Primary DNS” The primary domain name server that translates hostnames into IP addresses.

“Secondary DNS” The secondary domain name server that backups the Primary DNS.

- 35 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 39

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Smtp FTP Definitions in ConfigurationAppendix To install in Ethernet Hardware InstallationDI+ Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Installing Plug-in Initial Access to the Network CameraCheck Network Settings Add Password to Prevent Unauthorized Access Authentication How to UseMain Screen with Camera View Primary User’s CapabilitiesConfiguration Camera viewPan/tilt/zoom control buttons CCD control buttons There are four settings for the client side Client Settings886-2-82455282 F Fine-tuning for Best Performance Administrator’s CapabilitiesOnly Quality Images Will Do For Best Real-time Video ImagesSelect for Motion Jpeg Somewhere Between Real-time and Clear ImagesOpening Accounts for New Users Protect Network Camera by PasswordsMore Flexible Options for Viewers Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service Build a Multimedia Web Attraction SiteIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected 886-2-82455282 F Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User Network Settings GeneralGet IP address automatically & Use fixed IP address Streaming HttpDdns & UPnP 886-2-82455282 F Smtp Mail & FTP886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F Image Settings CCD Settings 886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Preset function area Camera ControlCamera control area 886-2-82455282 F Camera control area Preset function area Application Setup Weekly ScheduleEvent Operation Sequential Operation 886-2-82455282 F Viewing System Parameters Factory DefaultFactory default Viewing System LogRemote Controller Appendix Troubleshooting886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Pan/Tilt/Zoom Data Cleaning the LensTilt speed Zoom times URL Commands of the Network CameraStyle Convention OverviewGeneral CGI URL Syntax and Parameters Get Server Parameter ValuesMethod GET/POST Parameter pair Set Server Parameter ValuesNosync Available Parameters on the ServerTurn on automatic do restoration Resetip Enable to get ipaddress, subnet, router Wrestart Dns2 User name for primary FTP server, max MPEG4 Set maximum frame rate to 25 fps Ntsc & Cmos Your dynamic hostname Characters Usernameemail Auto iris Drive the Digital Output Return Query Status of the Digital InputCapture Single Snapshot Privilege=dido&privilege=listen Account ManagementSystem Logs Upload File firmware Configuration FileCamera Control Recall System Information Preset Locations Networking Technical SpecificationsLiability Electromagnetic Compatibility EMC