Vivotek PZ6112, PZ6122 manual Application Setup, Weekly Schedule, Event Operation

Page 58

Application Setup

Weekly Schedule

“Sun” ~ “Sat” Select the days of the week to perform the following operations. “Snapshots begin at” Set the time to start operations.

“Snapshots stop at” Set the time to stop operations. Setting identical begin time and stop time means 24-hour operation.

“All the time except for the above schedule” Invert the selected schedule. The default setting of this option is checked.

“Snapshot file name prefix” Specify the prefix name for the snapshot file. For example, if the prefix name of the snapshot file is “pz61x2”, the snapshot file name will be pz61x2 _20041116105638.jpg, that means the snapshot is taken at 10:56:38, 2004/11/16.

Event Operation

“Delay second(s) before detecting next event” Set the time delay before restarting to check on the triggering condition when the current condition is triggered. “Send pre-event image(s) when event occurs” Specify how many pre-event snapshot will be sent if events happen.

“Trigger condition” There are four conditions relative to the digital input and three windows for motion detection. More than one condition can be selected at once. Select the appropriate digital input condition that suits the characteristics of the external device. “high”, “low” selects level-triggering via external voltage input. “rising”, “falling” is for edge-triggering. There are three windows for motion detection each can be assigned a name. If motion detection has not been set up, it will not be shown. If this happens, clicking on “Motion detection” and a note will show to direct the User to the configuration page for motion detection.

“Trigger action” There are four options for two types of action. More than one

- 54 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 58

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Definitions in Configuration Smtp FTPAppendix Hardware Installation To install in EthernetDI+ Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized Access How to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewCamera view ConfigurationPan/tilt/zoom control buttons CCD control buttons Client Settings There are four settings for the client side886-2-82455282 F Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will DoSomewhere Between Real-time and Clear Images Select for Motion JpegProtect Network Camera by Passwords Opening Accounts for New UsersBuild a Multimedia Web Attraction Site Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected 886-2-82455282 F Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User General Network SettingsGet IP address automatically & Use fixed IP address Http StreamingDdns & UPnP 886-2-82455282 F Mail & FTP Smtp886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F Image Settings CCD Settings 886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Camera Control Preset function areaCamera control area 886-2-82455282 F Camera control area Preset function area Weekly Schedule Application SetupEvent Operation Sequential Operation 886-2-82455282 F Viewing System Log Factory DefaultFactory default Viewing System ParametersRemote Controller Troubleshooting Appendix886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Cleaning the Lens Pan/Tilt/Zoom DataURL Commands of the Network Camera Tilt speed Zoom timesOverview Style ConventionGet Server Parameter Values General CGI URL Syntax and ParametersMethod GET/POST Set Server Parameter Values Parameter pairAvailable Parameters on the Server NosyncTurn on automatic do restoration Resetip Enable to get ipaddress, subnet, router Wrestart Dns2 User name for primary FTP server, max MPEG4 Set maximum frame rate to 25 fps Ntsc & Cmos Your dynamic hostname Characters Usernameemail Auto iris Drive the Digital Output Query Status of the Digital Input ReturnCapture Single Snapshot Account Management Privilege=dido&privilege=listenSystem Logs Configuration File Upload File firmwareCamera Control Recall System Information Preset Locations Technical Specifications NetworkingElectromagnetic Compatibility EMC Liability