Vivotek PZ6122 Viewing System Log, Viewing System Parameters, Factory Default, Factory default

Page 61

Viewing System Log

Click on the link on the configuration page to view the system log file. The content of the file provides useful information about configuration and connections after system boot-up.

Viewing System Parameters

Click on this link on the configuration page to view the entire system’s parameter set. The content is the same as those in CONFIG.INI.

Factory Default

“Factory default”

Click on this link on the configuration page to restore factory default settings. Any changes made so far will be lost and the system will be reset to the initial factory settings. After clicking on the “Restore” button and make confirmation, the system will restart and require the installer program to set up the network again.

“Calibrate”

Recalibrate the home position to the default center to recover the tolerance caused by some external forces. This function is the same as the “Center” button on the Remote Controller. Please note that there is no confirming message box after clicking on the “Calibrate” button, the Network Camera will calibrate immediately.

- 57 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 61

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Smtp FTP Definitions in ConfigurationAppendix To install in Ethernet Hardware InstallationDI+ Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Installing Plug-in Initial Access to the Network CameraCheck Network Settings Add Password to Prevent Unauthorized Access Authentication How to UseMain Screen with Camera View Primary User’s CapabilitiesCamera view ConfigurationPan/tilt/zoom control buttons CCD control buttons There are four settings for the client side Client Settings886-2-82455282 F Fine-tuning for Best Performance Administrator’s CapabilitiesOnly Quality Images Will Do For Best Real-time Video ImagesSelect for Motion Jpeg Somewhere Between Real-time and Clear ImagesOpening Accounts for New Users Protect Network Camera by PasswordsProduct Demo for E-business Large-scale Service Demo on Multiple Sites Mid-scale ServiceBuild a Multimedia Web Attraction Site More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected 886-2-82455282 F Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User General Network SettingsGet IP address automatically & Use fixed IP address Streaming HttpDdns & UPnP 886-2-82455282 F Smtp Mail & FTP886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F Image Settings CCD Settings 886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Camera Control Preset function areaCamera control area 886-2-82455282 F Camera control area Preset function area Weekly Schedule Application SetupEvent Operation Sequential Operation 886-2-82455282 F Factory default Factory DefaultViewing System Log Viewing System ParametersRemote Controller Appendix Troubleshooting886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Pan/Tilt/Zoom Data Cleaning the LensTilt speed Zoom times URL Commands of the Network CameraStyle Convention OverviewGet Server Parameter Values General CGI URL Syntax and ParametersMethod GET/POST Parameter pair Set Server Parameter ValuesNosync Available Parameters on the ServerTurn on automatic do restoration Resetip Enable to get ipaddress, subnet, router Wrestart Dns2 User name for primary FTP server, max MPEG4 Set maximum frame rate to 25 fps Ntsc & Cmos Your dynamic hostname Characters Usernameemail Auto iris Drive the Digital Output Return Query Status of the Digital InputCapture Single Snapshot Privilege=dido&privilege=listen Account ManagementSystem Logs Upload File firmware Configuration FileCamera Control Recall System Information Preset Locations Networking Technical SpecificationsLiability Electromagnetic Compatibility EMC