Vivotek PZ6112, PZ6122 manual Set maximum frame rate to 25 fps

Page 78

	25			set maximum frame rate to 25 fps

	30			set maximum frame rate to 30 fps

flip	1			flip image
(r/w)
(r/w)	0			normal image

mirror	1			mirror image
(r/w)
(r/w)	0			normal image

Group: Audio

NAME		VALUE		DESCRIPTION

bitrate		8000		set bitrate to 8K bps
(r/w)
(r/w)		24000		set bitrate to 24K bps

		32000		set bitrate to 32K bps

transfermode		0		Full-duplex (Talk & Listen simultaneously)
(r/w)
(r/w)		1		Half-duplex (Talk or Listen, not at the same
				time)

		2		Simplex – Talk only

		3		Simplex – Listen only

sendclientaudio		0		Do not send audio from active client to all
(r/w)				other clients

		1		Send audio from active client to all other
				clients (only possible in Half-duplex)

source (r/w)		0		Use external microphone in

		1		Use build microphone

lowbandwidth		0		Disable low bandwidth environment support
(r/w)
(r/w)		1		Improve in low bandwidth environment

enableaec		0		Disable
(r/w)
(r/w)		1

Group: Image

NAME			VALUE		DESCRIPTION

brightness			<-5 ~ 5>		Adjust brightness of image according to
(r/w)					mode settings.

- 74 -

www.vivotek.com

T:886-2-82455282 F: 886-2-82455532

Image 78

Contents Page Technical@vivotek.com Before You Use This Product Package Contents Table of Contents Definitions in Configuration Smtp FTPAppendix Hardware Installation To install in EthernetDI+ Software Installation 886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized Access How to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewPan/tilt/zoom control buttons CCD control buttons Client Settings There are four settings for the client side886-2-82455282 F Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Only Quality Images Will DoSomewhere Between Real-time and Clear Images Select for Motion JpegProtect Network Camera by Passwords Opening Accounts for New UsersBuild a Multimedia Web Attraction Site Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service More Flexible Options for ViewersIf the web space has FTP service If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected 886-2-82455282 F Definitions in Configuration System Parameters User Group Administration 886-2-82455282 F Edit User Network Settings GeneralGet IP address automatically & Use fixed IP address Http StreamingDdns & UPnP 886-2-82455282 F Mail & FTP Smtp886-2-82455282 F 886-2-82455282 F Video Codec Parameters 886-2-82455282 F Image Settings CCD Settings 886-2-82455282 F 886-2-82455282 F Audio 886-2-82455282 F Motion Detection Preset function area Camera ControlCamera control area 886-2-82455282 F Camera control area Preset function area Application Setup Weekly ScheduleEvent Operation Sequential Operation 886-2-82455282 F Viewing System Log Factory DefaultFactory default Viewing System ParametersRemote Controller Troubleshooting Appendix886-2-82455282 F 886-2-82455282 F 886-2-82455282 F Cleaning the Lens Pan/Tilt/Zoom DataURL Commands of the Network Camera Tilt speed Zoom timesOverview Style ConventionGeneral CGI URL Syntax and Parameters Get Server Parameter ValuesMethod GET/POST Set Server Parameter Values Parameter pairAvailable Parameters on the Server NosyncTurn on automatic do restoration Resetip Enable to get ipaddress, subnet, router Wrestart Dns2 User name for primary FTP server, max MPEG4 Set maximum frame rate to 25 fps Ntsc & Cmos Your dynamic hostname Characters Usernameemail Auto iris Drive the Digital Output Query Status of the Digital Input ReturnCapture Single Snapshot Account Management Privilege=dido&privilege=listenSystem Logs Configuration File Upload File firmwareCamera Control Recall System Information Preset Locations Technical Specifications NetworkingElectromagnetic Compatibility EMC Liability