Vivotek IP3111/IP3121 user manual Restore button, Power adapter, Auto Iris Lens Connector

Page 12

Restore button

There is a button hidden in the box for restoring the system factory default settings. When the system fails to install or operates abnormally, use the included assistant stick in the package and follow the following procedures to reset the system back to its original status.

Poke the assistant stick into the hole to press down on the restore button. Restart the system by unplugging and re-plugging the power jack. While keeping the button pressed, the system will perform POST twice rather than the usual once, which can be observed from the flashing LEDs. After the system flashes the LEDs for the second time, withdraw the stick to release the button. The system will have restored factory default settings at that moment.

Power adapter

Connect the power jack of the included power adapter. Connecting the power adapter should be the last operation while physically installing NetworKam.

Auto Iris Lens Connector

If the auto iris lens is used, AES on rear panel must be turned OFF. And you also have to select VIDEO Drive or DC Drive lens by the switch.

The pin assignment of the auto iris lens connector is as follows:

 

VIDEO Drive

DC Drive

 

 

 

Pin 1

Power source

Damp-

 

 

 

Pin 2

Video signal

Damp+

 

 

 

Pin 3

Not used

Driver+

 

 

 

Pin 4

Ground, Shield

Driver-

 

 

 

11

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Image 12
Contents NetworKam Before You Use Table of Contents How to Use Telnet Appendix Package Contents 886-2-22404099 886-2-22404097 Physical Description Rear PanelEthernet 10/100 socket COM portGeneral I/O terminal block Status LEDs Restore button Power adapterAuto Iris Lens Connector How to Install Hardware installation Ethernet EnvironmentCable connection Power on Software configuration Easy way with installer program886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Manual way with existing programs First access to NetworKam 886-2-22404099 886-2-22404097 Modem Environment Cable connection Install a new modem 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Setup a new connection 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 First access to NetworKam 886-2-22404099 886-2-22404097 How to Use Authentication 886-2-22404099 886-2-22404097 Primary user’s capability Main screen with camera viewPan/Tilt positioning device control Client Setting Url http//NetworKam/client.html System configuration System parameters User group administration Network settings 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Video codec parameters 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Motion detection 886-2-22404099 886-2-22404097 Camera positioning device configuration 886-2-22404099 886-2-22404097 Modem and dialup settings 886-2-22404099 886-2-22404097 Application 886-2-22404099 886-2-22404097 Homepage layout settings One-shot fast configuration via FTP Read only string For teal For blank, 1 for default image or 2 for loading from URL Standard IP format or string shorter than 40 characters 1200k , 1000k , 768k , 512k , 384k , 256k , 128k , 64k 3, 5, 10, 15, 20, 25, 30 30 for Ntsc only Home Restore factory default settings Advanced functionsViewing system log Viewing system parametersUploading snapshots periodically to an external FTP server Customizing homepage imagesUploading the configuration file Software revision upgrade886-2-22404099 886-2-22404097 System core debugging Monitor changed status of digital inputsStop information dumping Query status of digital inputsSkip installation during the next boot Reset network for new settingsReset system Set digital outputsURL commands of NetworKam Capture update Snapshot of Jpeg imageClear data mode serial port driver Move motorized device in PT directionRestart system URL General format of command URL System configuration URLSystem resource URL Security configuration URL Network configuration URLVideo configuration URL Image quality configuration URL Camera configuration URL Camera custom command configuration URLModem configuration URL Application configuration URLHomepage layout configuration URL Post procedure AppendixFrequently asked questions 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Technical specifications NetworkingElectromagnetic Compatibility EMC