Vivotek IP3111/IP3121 user manual Power on

Page 15

Power on

Make sure all cables are correctly and firmly connected before turning on NetworKam. Turn on cameras, sensors, alarm devices, and then attach the power adaptor of NetworKam to the electric power socket*. After the POST (power-on self test) is complete and the result is successful, NetworKam is ready for software configuration as described in this manual. At this stage, network speed and video modulation type are automatically detected. If the detection of video modulation fails, administrators may change the setting on the configuration page. Refer to the configuration section for further information.

Connect the power jack of the power adapter to NetworKam prior to plugging the utility end into the

utility power socket. It will reduce accidental electric surge shock.

14

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Image 15
Contents NetworKam Before You Use Table of Contents How to Use Telnet Appendix Package Contents 886-2-22404099 886-2-22404097 COM port Physical DescriptionRear Panel Ethernet 10/100 socketGeneral I/O terminal block Status LEDs Restore button Power adapterAuto Iris Lens Connector How to Install Hardware installation Ethernet EnvironmentCable connection Power on Easy way with installer program Software configuration886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Manual way with existing programs First access to NetworKam 886-2-22404099 886-2-22404097 Modem Environment Cable connection Install a new modem 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Setup a new connection 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 First access to NetworKam 886-2-22404099 886-2-22404097 How to Use Authentication 886-2-22404099 886-2-22404097 Main screen with camera view Primary user’s capabilityPan/Tilt positioning device control Client Setting Url http//NetworKam/client.html System configuration System parameters User group administration Network settings 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Video codec parameters 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Motion detection 886-2-22404099 886-2-22404097 Camera positioning device configuration 886-2-22404099 886-2-22404097 Modem and dialup settings 886-2-22404099 886-2-22404097 Application 886-2-22404099 886-2-22404097 Homepage layout settings One-shot fast configuration via FTP Read only string For teal For blank, 1 for default image or 2 for loading from URL Standard IP format or string shorter than 40 characters 1200k , 1000k , 768k , 512k , 384k , 256k , 128k , 64k 3, 5, 10, 15, 20, 25, 30 30 for Ntsc only Home Viewing system parameters Restore factory default settingsAdvanced functions Viewing system logCustomizing homepage images Uploading snapshots periodically to an external FTP serverSoftware revision upgrade Uploading the configuration file886-2-22404099 886-2-22404097 Query status of digital inputs System core debuggingMonitor changed status of digital inputs Stop information dumpingSet digital outputs Skip installation during the next bootReset network for new settings Reset systemMove motorized device in PT direction URL commands of NetworKamCapture update Snapshot of Jpeg image Clear data mode serial port driverRestart system URL General format of command URL System configuration URLSystem resource URL Network configuration URL Security configuration URLVideo configuration URL Image quality configuration URL Camera custom command configuration URL Camera configuration URLApplication configuration URL Modem configuration URLHomepage layout configuration URL Appendix Post procedureFrequently asked questions 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Networking Technical specificationsElectromagnetic Compatibility EMC